Abstract:Preharvest threshing is a harvesting method that focuses on collecting rice grains while leaving the rice straw unharvested. Investigating the interaction mechanism between the machine and rice during the operation process and its correlation with harvest losses is crucial for enhancing harvest quality. In this study, structural design and operational mechanism analysis of the combs was conducted through theoretical analysis. By extracting the relevant parameters of rice plants, a model of entire-plant rice during the harvesting period was established based on the discrete element method (DEM). Numerical simulation studies were conducted to clarify the interaction mechanism between the machinery and rice at different operating stages and under various operating parameters, as well as the impact of this interaction on operational quality. The simulation results revealed that various operating parameters had a significant impact on the sliding-cut effect between the combs and rice. A higher cylinder rotation speed enhanced the effect, whereas increased forward velocity hampered it. Additionally, the effect initially improved and then decreased with a higher threshing height. In the bench test, high-speed cameras were used to verify and further analyze the comb–rice interaction mechanism and explore the optimal working parameter combination. The results showed that at a rotation speed of 616 r/min, a forward velocity of 0.91 m/s, and a threshing height of 792 mm, the grain loss rate was 1.997%, and the impurity rate was 4.073%. The harvesting losses were effectively reduced, validating the effectiveness of the study on the interaction between the machinery and rice.

Investigation of the mechanism of aerodynamic separation of rice husks from brown rice following paddy hulling by coupled CFD-DEM

Study on the Segregation of Brown Rice and Rice Husks Mixture in Inclined Chute Flow

CFD Simulation Analysis and Experimental Verification of Hybrid Rice Pollen Diffusion Process

Optimization of airflow cylinder sieve for threshed rice separation using CFD-DEM

DEM Study of White Rice Separation in an Indented Cylinder Separator

A New Process to Resource Rice Hull

Movement Rules and Screening Characteristics of Rice-Threshed Mixture Separation Through a Cylinder Sieve

Study on Separation of the Tuber-Soil Binary Mixture Based on Vibration and Airflow Coupling

Analysis of the Impact Hulling Behaviour of Paddy Grains

Separation characteristics of white rice in an indented cylinder separator with a baffle

Stripping Mechanism and Loss Characteristics of a Stripping-Prior-to-cutting Header for Rice Harvesting Based on CFD-DEM Simulations and Bench Experiments

DEM Investigation of Particle Flow in a Vertical Rice Mill: Influence of Particle Shape and Rotation Speed

Study on Radial Segregation of Whole and Broken Rice in an Indented Cylinder Separator

Simulation of the Movement of Rice Grains in a Centrifugal Huller by Discrete Element Method and the Influence of Blade Shape

Simulation and Experiment of Segregating/mixing of Rice Husk–sand Mixture in a Bubbling Fluidized Bed

Optimization of the Cylindrical Sieves for Separating Threshed Rice Mixture Using EDEM

Study on Performance of the Inertia-deposition Separation Chamber with Air Sution

DEM-CFD Coupling Simulation and Optimisation of Rice Seed Particles Seeding a Hill in Double Cavity Pneumatic Seed Metering Device

Analysis of the Interaction Mechanism Between Preharvest Threshing Device and Rice at Harvesting Period Based on DEM Simulations and Bench Tests

Investigation of Rice Debranning Mechanism Based on Tribological Behaviour Between Rice Grains

Airflow Pressure Drop in the Inertia-deposition Separation Chamber of Combine Harvester Threshing Prior to Cutting