Abstract:Lithium–sulfur (Li–S) batteries have higher theoretical capacity and higher energy density, so they are considered to be one of the most promising candidates for next-generation energy storage devices. However, electrolyte-soluble polysulfides cause a shuttle effect and lead to poor cycle stability. This is one of the main obstacles to the practical applications of LSB technology. To overcome this problem, here, we report polar Ni2P hollow microspheres, with multilayer nesting, as sulfur host materials. Specifically, the multilayer polar Ni2P can simultaneously act as a multilayer physical barrier and chemical adsorption material. In addition, the Ni2P microspheres serve as activation catalysts, accelerating the redox reaction kinetics. The above features allow the structure to effectively suppress the shuttle effect and improve the discharge capacity and cycle stability of LSB. For example, the three-dimensional printed Ni2 (3DP-Ni2) cathode can provide an initial capacity of 682 mAh/g, obtaining high cycle stability with low-capacity attenuation of 0.0072% per cycle for 400 cycles under 2C. Even when the sulfur loading is increased from 6.1 to 9.3 mg/cm2, this material still shows good capacity retention. This work inspires the design of multifunctional cathode materials and paves a new path for the development of Li–S batteries.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.1c01580?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.1c01580</a>.XRD spectra of NiO; CV curves of the 3DP-Ni2 and cathodes; charge and discharge curves with the 3DP-Ni2 and cathodes; cycling performance of and 3DP-Ni2 cathodes at 0.5C, 1C, and 2C; photograph of the pole piece; rheological properties of the printing ink; photograph of the 3D-printed sulfur cathodes and the simulated battery; XPS spectra of Ni 2p for Ni2P of Ni2P-Li2S6; Li2S6 symmetrical cell with the Ni2P electrode; minimum energy path and potential energy profiles for Li ion diffusion on the Ni2P (111) facet, (210) facet, (111) facet, and carbon black surface; and table of comparison of the performances at high sulfur loading conditions (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.1c01580/suppl_file/sc1c01580_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

NiCo2O4@PPy Concurrently As Cathode Host Material and Interlayer for High-Rate and Long-Cycle Lithium Sulfur Batteries

Bimetallic Nanoparticles Decorated Porous Carbon As the Host Material to Enhance the Performance of Lithium-Sulfur Batteries

Selective Adsorption and Electrocatalysis of Polysulfides Through Hexatomic Nickel Clusters Embedded in N-Doped Graphene Toward High-Performance Li-S Batteries

A Freestanding Flexible Single‐Atom Cobalt‐Based Multifunctional Interlayer Toward Reversible and Durable Lithium‐Sulfur Batteries

Surface-coated AlF3 Nanolayers Enable Polysulfide Confinement Within Biomass-Derived Nitrogen-Doped Hierarchical Porous Carbon Microspheres for Improved Lithium-Sulfur Batteries

NiCo 2 S 4 Yolk-Shell Hollow Spheres with Physical and Chemical Interaction Toward Polysulfides for Advanced Lithium-Sulfur Batteries

A hollow Co0.12Ni1.88S2/NiO heterostructure that synergistically facilitates lithium polysulfide adsorption and conversion for lithium-sulfur batteries

Multishelled Ni 2 P Microspheres as Multifunctional Sulfur Host 3D-Printed Cathode Materials Ensuring High Areal Capacity of Lithium–Sulfur Batteries

Multishelled Ni2P Microspheres As Multifunctional Sulfur Host 3D-Printed Cathode Materials Ensuring High Areal Capacity of Lithium–Sulfur Batteries

Biomass Derived Ni(OH) 2 @porous Carbon/sulfur Composites Synthesized by a Novel Sulfur Impregnation Strategy Based on Supercritical CO 2 Technology for Advanced Li-S Batteries

Flower-Like NiS2 /WS2 Heterojunction as Polysulfide/sulfide Bidirectional Catalytic Layer for High-Performance Lithium-Sulfur Batteries

Novel Ni/Ni<sub>2</sub>P@C hollow heterostructure microsphere as efficient sulfur hosts for high-performance lithium-sulfur batteries

Construction of polypyrrole coated hollow cobalt manganate nanocages as an effective sulfur host for lithium-sulfur batteries

Facilitation polysulfides adsorption/catalysis by nitrogen/phosphorous co-doped carbon nanofibers networks for advanced lithium/polysulfides batteries

Ni Single Atoms on Hollow Nanosheet Assembled Carbon Flowers Optimizing Polysulfides Conversion for Li−S Batteries

Hollow Polypyrrole @ MnO2 Spheres As Nano-Sulfur Hosts for Improved Lithium-Sulfur Batteries

CoP@C with chemisorption-catalysis effect toward lithium polysulfides as multifunctional interlayer for high-performance lithium-sulfur batteries

Accelerated Conversion of Polysulfides for Ultra Long‐Cycle of Li‐S Battery at High‐Rate over Cooperative Cathode Electrocatalyst of Ni0.261Co0.739S2/N‐Doped CNTs

Ni-NiS Heterojunction Composite-Coated Separator for High-Performance Lithium Sulfur Battery

Boosting the Rate Performance of Li-S Batteries Via Highly Dispersed Cobalt Nanoparticles Embedded into Nitrogen-Doped Hierarchical Porous Carbon

Novel NiCo2O4 nanofibers prepared via electrospinning method as host materials for perfect polysulfide inhibition