Abstract:Advanced lightweight high-strength steels are often compositionally and microstructurally complex. While this complex feature enables the activation of multiple strengthening and strain-hardening mechanisms, it also leads to a complicated damage behavior, especially in the presence of hydrogen (H). The mechanisms of hydrogen embrittlement (HE) in these steels need to be properly understood for their successful application. Here we focus on a high-Mn (∼20 wt.%), high-Al (∼9 wt.%) lightweight steel with an austenite (∼74 vol.%) and ferrite (∼26 vol.%) two-phase microstructure and unravel the interplay of H-related decohesion and localized plasticity and their effects on failure. We find that HE in this alloy is driven by both, H-induced intergranular cracking along austenite-ferrite phase boundaries and H-induced transgranular cracking inside the ferrite. The former phenomenon is attributed to the mechanism of H-enhanced decohesion. For the latter damage behavior, systematic scanning electron microscopy-based characterization reveals that only parts of the transgranular cracks inside ferrite are straight (∼52% proportion) and along the cleavage plane. Other portions of these transgranular cracks show a distinct deviation from the {100} planes at certain stages of crack propagation, which is associated with a mechanism transition from the H-enhanced transgranular decohesion of the ferrite by cleavage to the H-associated localized plasticity occurring near the propagating crack tip. These mechanisms are further discussed based on a detailed comparison to the damage behavior at cryogenic temperatures and on the nanoindentation results performed with in-situ H-charging. The findings provide new insights into the understanding of the interplay between different HE mechanisms operating in high-strength alloys and their synergistic effects on damage evolution.

The Influence of Phosphorus on the Temper Embrittlement and Hydrogen Embrittlement of Some Dual-Phase Steels

Role of Interface between Ferrite and Martensite in Hydrogen Embrittlement Behavior of Ultra-high Strength Dual-phase Steel Sheets

Effect of hydrogen charging intensities and times on hydrogen embrittlement of Q&P980 steel

Change in Hydrogen Trapping Characteristics and Influence on Hydrogen Embrittlement Sensitivity in a Medium-Carbon, High-Strength Steel: The Effects of Heat Treatments

Improving Hydrogen Embrittlement Resistance of Hot-Stamped 1500 MPa Steel Parts That Have Undergone a Q&P Treatment by the Design of Retained Austenite and Martensite Matrix

Hydrogen embrittlement mechanisms in advanced high strength steel

Inhibition of grain growth by pearlite improves hydrogen embrittlement susceptibility of the ultra-low carbon ferritic steel: the influence of H-assisted crack initiation and propagation mechanisms

Hydrogen influence on some advanced high-strength steels

Ferrite effects on the hydrogen embrittlement of 17-4PH stainless steel

Hydrogen-induced hardening of a high-manganese twinning induced plasticity steel

Interaction of Phosphorus, Carbon, Manganese, and Chromium in Intergranular Embrittlement of Iron

Effect of manganese content on the hydrogen embrittlement of twinning-induced plasticity (TWIP) steels under hydrogen charging and hydrogen environment

Hydrogen-associated decohesion and localized plasticity in a high-Mn and high-Al two-phase lightweight steel

Current Challenges and Opportunities Toward Understanding Hydrogen Embrittlement Mechanisms in Advanced High-Strength Steels: A Review

Optimizing the hydrogen embrittlement resistance by tuning the structures of Cu-rich nanoprecipitates in high strength martensite stainless steels

Improving the ductility of ultrahigh strength lath martensite through heterogeneous carbon distribution

Effect of test temperature on the hydrogen embrittlement susceptibility of a duplex stainless steel

Hydrogen embrittlement studies of hot-stamped boron steel with different prior austenite grain sizes

Impact of hydrogen embrittlement on the tensile-shear property of resistance spot-welded advanced high-strength martensitic steels

Effect of shearing prestrain on the hydrogen embrittlement of 1180 MPa grade martensitic advanced high-strength steel

Improvement of Resistance to Hydrogen Embrittlement for 1300MPa Ultra-high Strength Steel by Introducing Nano-sized Cu-rich Phase Precipitation