Abstract:This article presents the optimization of system design and calibration algorithm for light detection and ranging (LiDAR) imager based on the single-photon avalanche diode (SPAD) image sensor. The supply voltage and the gating high-voltage driving circuit of the SPAD are optimized based on the theoretical analysis and experimental data to improve the trigger times of the SPAD for the laser echo. The real-time calibration algorithm is realized in a field-programmable gate array (FPGA) to obtain the flight time and improve the measurement reliability. A 10-bit time- and area-efficient shifted interframe multievent histogram and a bubbling-based peak detection algorithm are used to calculate flight time, which requires the memory as low as 16 times smaller than storing complete histogram if the pixel values are coded on up to 10 bits and can detect up to four different targets simultaneously without increasing the measurement time. The performance of different kinds of background noise measurement methods is analyzed based on experimental data, which shows that the measurement results are more accurate with the increase of time-to-digital converter (TDC) event detection ability. The proposed crosstalk suppression algorithm based on the LiDAR transmission function can reduce optical crosstalk between adjacent pixels to improve the measurement reliability of the LiDAR imager. The LiDAR imager is presented as capable of measuring a 10-m range with 70-Klux background noise and a $30^{\circ } \times 45^{\circ }$ field of view.

Recent Improvement on Spatial Resolution Enhanced Distributed Temperature Sensors

Measurement of radiation temperature with high time-resolution

The Research on Improving the Spatial Resolution of Radiant Optical Fiber Temperature Sensor

Design of data acquisition system for distributed optical fiber sensor

Optimization of System Design and Calibration Algorithm for SPAD-Based LiDAR Imager

Improving Spatial Resolution in Fiber Raman Distributed Temperature Sensor by Using Deconvolution Algorithm

24 km High-Performance Raman Distributed Temperature Sensing Using Low Water Peak Fiber and Optimized Denoising Neural Network

Femtosecond Laser Written Ultra-Weak Fabry-Perot Array for Distributed Absolute Temperature Profile Sensing with High Spatial Resolution.

High-speed and high-resolution YAG fiber based distributed high temperature sensing system empowered by a 2D image restoration algorithm

Super Spatial Resolution Raman Distributed Temperature Sensing via Deep Learning

Fiber Raman Distributed Temperature Sensor Based on the Light Source with Adjustable Pulsewidth

ANN-Assisted High-Resolution and Large Dynamic Range Temperature Sensor Based on Simultaneous Microwave Photonic and Optical Measurements

Breakthrough the physical barrier on spatial resolution in Raman distributed fiber sensing using chaotic correlation demodulation

Performance Improvement of Sapphire Fiber-Optic Sensor Using A U-Shaped Reference Fiber

High-resolution Temperature Fiber Ring Laser Sensor Based on Relative Intensity Noise Measurement

Raman Distributed Temperature Sensor with Optical Dynamic Difference Compensation and Visual Localization Technology for Tunnel Fire Detection

Spatial Resolution Optimization Technology of Raman OTDR Using Variable Sampling Rate

Enhanced Raman Distributed Temperature Sensor Using a High Raman Gain Fiber

Long-Range High Spatial Resolution Distributed Temperature and Strain Sensing Based on Optical Frequency-Domain Reflectometry

Ultimate Spatial Resolution Realisation in Optical Frequency Domain Reflectometry with Equal Frequency Resampling

A Distributed Soil Temperature Measurement System with High Spatial Resolution Based on Botdr