Abstract:Real-time Simulation (RTS) is one of the effective means via which to study device level or system level dynamics, such as power converter online testing, evaluation, and control, and power system stability analysis. The RTS -enabled design-chain offers a time -effective, low-cost, and fail-safe development process. As the penetration of renewable energy is becoming higher, the demand in hybrid system real-time simulation becomes imperative, where fast-dynamic device level power converters and slow -dynamic large -scale power systems are simulated at the same time. This paper introduces a novel hybrid real-time simulation architecture based on the central processing unit (CPU) and the field-programmable gate array (FPGA). Compared with the off-the-shelf power system real-time simulation system, it offers both wide time scale simulation and high accuracy. The multi-time scale model can perform electromechanical electromagnetic transient hybrid simulation, which can be applied to the research of power systems penetrated with power converters. In the proposed simulation platform, the communication delay is introduced when different RTS platforms exchange real-time data. The communication delay should be considered in the stability analysis of the grid-connected inverters in a weak grid environment. Based on the virtual impedance characteristic formed by the control loop with and without communication delay, the impedance characteristics are analyzed and inter-simulator delay impacts are revealed in this paper. Theoretical analysis indicates that the communication delay, contrary to expectation, can improve the virtual impedance characteristics of the system. With the same hardware simulation parameters, the grid-converter system is verified on both the Typhoon system alone and the Typhoon-dSPACE-SpaceR hybrid simulation platform. The THD value of grid current in a weak grid environment that works in the Typhoon system is 4.98%, and 2.38% in the Typhoon-dSPACE-SpaceR hybrid simulation platform. This study eventually reveals the fact that the inter-simulation delay creates the illusion that the control system built in the novel hybrid real-time simulation is more stable under weak grid conditions.

Evaluation of the Delay Effect in a Novel Hybrid Real-Time Simulation Platform

Evaluation of the Communication Delay in a Hybrid Real-Time Simulator for Weak Grids

Real-time Simulation of Wind Turbine Converter-Grid Systems

Real-time Hybrid Simulation Platform for Wide-Area Monitoring and Control Applications

A 400-V/50-kva Digital–Physical Hybrid Real-Time Simulation Platform for Power Systems

A Novel Interfacing Technique for Distributed Hybrid Simulations Combining EMT and Transient Stability Models

Control Strategy of a High Power Grid Simulator for the Test of Renewable Energy Grid Converter.

Real-Time Simulation of Power Electronic Systems Based on Predictive Behavior

Development of an Rtds-Tsa Hybrid Transient Simulation Platform with Frequency Dependent Network Equivalents

Parallel electromagnetic transient simulation of power systems with a high proportion of renewable energy based on latency insertion method

On Modeling Depths of Power Electronic Circuits for Real-Time Simulation – A Comparative Analysis for Power Systems

A Novel Real-Time Hybrid Simulator Base On Two Personal Computers And Analog Interfaces For Data Exchange

Key Technologies of the Power System Electromagnetic/Electromechanical Real-time Hybrid Simulation

Design and Realization of Program for Power System Electromechanical Transient and Electromagnetic Transient Hybrid Simulation

Real-time simulation for detailed wind turbine model based on heterogeneous computing

Digital Computer and RTDS Based Real-time Hybrid Simulation

Hybrid simulator for power system transient stability analysis and emergency control via real-time measurement

A novel hybrid dynamic simulation algorithm based on iterative coordination

Real-Time Simulation of Power System Electromagnetic Transients on FPGA Using Adaptive Mixed-Precision Calculations

An Networked HIL Simulation System for Modeling Large-scale Power Systems

Real-time hybrid simulation based on vector form intrinsic finite element and FPGA