Abstract:Following the large‐scale integration of distributed power sources into distribution networks, fault currents undergo noticeable changes, which impacts the accuracy of conventional single‐phase ground fault algorithms. To tackle these issues, this work initially proposes an active distribution network ground fault protection algorithm based on the direction of extreme energy. Then, by establishing the electrical system structure and model of distribution network ground faults in the presence of distributed power sources, theoretical derivations and computations of transient zero‐sequence current frequency variations during fault instances are carried out. The characteristics of zero‐sequence current directions under distributed power sources integration are analysed, facilitating the design of a local ground fault determination algorithm grounded in the principle of energy extremum direction. This includes outlining fault determination and isolation procedures for ground fault monitoring equipment. Finally, through simulation testing, it is proven that the algorithm can reliably detect ground faults under both neutral point grounding configurations involving an arc suppression coil and ungrounded systems, across a range of transition resistances, varying numbers and capacities of distributed power sources connected, and differing grounding switch operation angles. After large‐scale distributed power sources are connected to the distribution network, the fault current undergoes noticeable changes, affecting the accuracy of traditional single‐phase grounding fault algorithms. Therefore, the objective of this paper is to address the impact of distributed power integration on the grounding algorithms of distribution networks. The main contribution is: by establishing an electrical system structure and model for distribution network grounding faults that include distributed generation (DG), theoretically deriving and calculating the transient zero‐sequence current frequency changes at the moment of fault, analysing the directional characteristics of zero‐sequence currents under DG connection conditions, designing a local grounding fault judgment algorithm based on energy extremum direction, and providing a fault judgment and isolation process for grounding fault monitoring devices. The results show: through simulation and experimentation, the algorithm was tested, and the method can reliably judge grounding faults under various transition resistances, different numbers and capacities of connected distributed power sources, and different grounding switch‐on angles. The applicability of the algorithm covers both methods of neutral grounding through an arc suppression coil and ungrounded neutrals, adapting to scenarios with or without DG connections.

A New Locating Method of Break Faults in an Active Distribution Network Based on Distributed Generator Monitoring

Fault Location in Distribution Network with Distributed Generations Based on Improved Binary Gravitational Search Algorithm

A Fault Branch Location Approach for Partially Observable Distribution Network

Block-Sparse Bayesian Learning Method for Fault Location in Active Distribution Networks with Limited Synchronized Measurements

An adaptative differential zone fault locating scheme for distribution system with DGS

Influence of Distributed Generation on Fault Location and Voltage Quality of Distribution Network

Research on single-phase grounding fault location of distribution network with DG

Enhancing Resilience and Reliability of Active Distribution Networks through Accurate Fault Location and Novel Pilot Protection Method

Fault Location Method of Distributed Generation Sources in Distribution Networks Based on Optimal Configuration of Voltage Sag Monitoring Points

State Estimation Based Fault Location Method for Active Distribution Networks

Fault Location in Active Distribution Networks Using Multiple Measurement-Based Bayesian Learning

A novel fault location method for distribution networks with distributed generations based on the time matrix of traveling-waves

Accurate Fault Location of Complex Distribution Network with Distributed Generators

Fast and Accurate Method for Short-Circuit Current Calculation in Distribution Network with Iidgs

Research on Size and Location of Distributed Generation with Vulnerable Node Identification in the Active Distribution Network

Precise Fault Location in Distribution Networks Based on Optimal Monitor Allocation

Ground fault protection algorithm of active distribution network based on energy extremum direction

A Method for Fault Localization in Distribution Networks with High Proportions of Distributed Generation Based on Graph Convolutional Networks

The Adaptability Analysis of Single-phase Fault Location for Distribution Network with Generations

Data-Driven Ground-Fault Location Method in Distribution Power System With Distributed Generation

Fault Location Method of Distribution Network Based on VGAE-GraphSAGE