Abstract:Abstract Owing to the advantages of monolithic structure and little need for assembling, compliant guiding mechanisms appear to be an effective solution for decoupling multi-freedom precision motions but are still prone to geometric nonlinearities of parasitic error and stiffening effect for large strokes. This paper proposes a coiled L-shape compliant guiding mechanism featuring millimeter-scale strokes with a compact structure, constant stiffness and minimized parasitic error. The coiled compliant guiding mechanism is formed by convolving L-shape flexure beams in a zigzag configuration with decoupled XY motions achieved. Its geometrically nonlinear parasitic error, variation in stiffness and primary vibration are captured by using a dynamic beam constraint model (DBCM). It is theoretically, numerically and experimentally found, by comparing with double parallel guiding mechanisms, that the kinetostatic and dynamic behaviors of the coiled L-shape compliant mechanism are nearly independent on the applied force within the intermediate-deformation ranges. Such a weak geometric nonlinearity with the minimized influence of axially-loaded stiffening and kinematics-arching effects is much different from the double parallel guiding mechanisms. The obtained results indicate that large strokes with constant stiffness and invariable resonance frequency can be realized, which also allows small parasitic errors.

Nonlinear Characteristic Analysis of Long-Stroke Quasi-Zero-Stiffness Flexure Guiding Mechanism (Lqfgm)

A New Nonlinear Spatial Compliance Model Method for Flexure Leaf Springs with Large Width-to-Length Ratio under Large Deformation.

A bistable mechanism with linear negative stiffness and large in-plane lateral stiffness: design, modeling and case studies

Nonlinear evaluation of a large-stroke coiled L-shape compliant guiding mechanism with constant stiffness

Extended Dynamic Stiffness Model for Analyzing Flexure-Hinge Mechanisms With Lumped Compliance

Compliance modeling of planar flexure-based mechanisms and its application to micro-motion stages

A Semi-Analytical Modeling Method for the Static and Dynamic Analysis of Complex Compliant Mechanism

Analytical Compliance Modeling of Serial Flexure-Based Compliant Mechanism under Arbitrary Applied Load

Design of Constant-Force Compliant Sarrus Mechanism Considering Stiffness Nonlinearity of Compliant Joints

Design of a Novel Compliant Constant-Force Mechanism with High Lateral Stiffness

Nonlinear Modeling and Analysis of Compliant Mechanisms with Circular Flexure Hinges Based on Quadrature Beam Elements

Kinetostatic and Dynamic Modeling of Flexure-Based Compliant Mechanisms: A Survey

A compliant guiding mechanism utilizing orthogonally oriented flexures with enhanced stiffness in degrees-of-constraint

Nonlinear Kinetostatic Modeling and Analysis of a Large-Range 3-PPR Planar Compliant Parallel Mechanism

A novel compliance modeling method for compliant parallel mechanisms and its application

Analytical Model for Flexure---Based Proportion Parallel Mechanisms with Deficient---Determinate Input

Understanding Coupled Factors That Affect the Modelling Accuracy of Typical Planar Compliant Mechanisms

Stiffness modeling of compliant parallel mechanisms and applications in the performance analysis of a decoupled parallel compliant stage

Spatial compliance modeling and optimization of a translational joint using corrugated flexure units

Dynamic Analysis of a Flexure-Based Compliant Stage

Modeling and analysis of an over-constrained flexure-based compliant mechanism