Long-pulse high-efficiency relativistic Cherenkov oscillators at L- and S- bands
XingJun Ge,Juntao He,Jinchuan Ju,Junpu Ling,Lili Song
DOI: https://doi.org/10.1109/IRMMW-THz.2019.8874264
2019-01-01
Abstract:Relativistic backward wave oscillators (RBWOs) are one type of the promising devices that can produce high power microwaves (HPMs) and is extensively investigated because of its merits such as compact structure, high efficiency, and good stability. In L-, S-, C-, and X-bands, RBWOs had achieved output power of 2-6.5 GW, efficiency of 20%-36%, and repetition rate of 20-100 Hz. However, the pulse duration of RBWOs usually does not exceed 20-30 ns owing to the "pulse shortening" phenomenon. Recently, many studies on measures restraining pulse shortening are taken to prolong the microwave pulse duration. In 2008, the Institute of High Current Electronics, Russian Academy of Sciences reported the experimental results that they had gotten a microwave with power of 3 GW and pulse duration of 90 ns in an S-band RBWO. Compared with the diode voltage pulse width (300 ns), there occurred serious pulse shortening phenomenon. And there are no repetition rate experimental reports. In 2011, the National University of Defense Technology in China reported recent advances in long-pulse HPM sources with repetitive operation in S-, C-, and X-Bands. In experiments, driven by a repetitive long-pulse accelerator (the diode voltage pulse width is about 160 ns), the S-band source operated stably with output power of 1.2 GW with pulse duration of about 100 ns in 20 Hz repetition mode. The X-band source generated 1.2 GW microwave power with pulse duration of about 100 ns in the 20 Hz repetition mode. The C-band source generated HPMs with power of about 2 GW and pulse duration of about 100 ns in single-shot mode. It was suggested that explosive emissions on surfaces of designed eletrodynamic structures restrained pulse duration and operation stability. But the beam-wave conversion efficiencies of the above HPM sources are all below 25%.Analyzing the above research status, it's not difficult to find out that great progress has been made on the research of long-pulse RBWOs, but there are some shortages as follows: (1) the pulse shortening phenomenon is obvious, which is difficult to exceed 100 ns, (2) the beam-wave conversion efficiencies is low, which is generally below 30%. Because of a small free-space transmission loss and a strong diffraction, the low bands HPMs have important applications prospects in civil and defense fields. The biggest challenge in studying low bands relativistic Cherenkov oscillator is the miniaturization.This paper presents the mechanism and realization of the long-pulse high-efficiency relativistic Cherenkov oscillators operating at L- and S-bands. In simulation, microwaves centred at 1.53 GHz are generated, with power of 2.4 GW, and efficiency of 38%. By optimizing the scheme of electron beam collection, the phenomenon of pulse shortening is effectively suppressed. In the experiment, microwaves centred at 1.52 GHz are generated, with power of 2 GW, efficiency of 33% and pulse duration above 140 ns. Furthermore, an S-band relativistic Cherenkov oscillator is designed. In simulation, microwaves centred at 3.76 GHz are generated, with power of 3.2 GW, and efficiency of 34%. In the experiment, microwaves centered at 3.75 GHz are generated, with power of 2.5 GW, efficiency of 31%, repetition rate of 20 Hz and pulse duration above 110 ns. In the further experiment, a microwave with pulse duration above 200 ns and power of 1.5 GW is generated. The structure of the S-band device is shown in Fig. 1. The device consists of circular cathode, dual resonant cavities, nonuniform SWSs, taper waveguide, collector, and guiding-magnetic field.[GRAPHICS]