Abstract:Titanium alloys are notoriously difficult to machine. They are used in the manufacture of various types of lightweight components. It is therefore important to improve their machinability and thus achieve sustainability in machining such alloys, by selecting appropriate influential factors: cutting parameters, tool material, geometric form, coolant types, and hybrid machining methods, to deliver efficient output. Nowadays, meta-heuristic algorithms effectively solve multi-objective optimization in machining problems instead of single-objective one. Along with that, the mathematical predictive models used for single-objective optimization are gradually being replaced by machine learning algorithms, which are highly robust and efficient in terms of prediction performance. Therefore, this work addresses the prediction and optimization of average surface roughness (Ra) and tool wear (VB) in Ti 6 Al 4 V alloy turning, using a WC tool coated by chemical vapor deposition (CVD) and physical vapor deposition (PVD), with dry machining. We apply a two-pronged approach combining machine learning (ML) and Non-Dominated Sorting Genetic Algorithm (NSGA-II), to model and optimize Ra and VB. The four ML models – Linear Regression (LIN), Support Vector Machine Regression (SVR), Extreme Gradient Boosting (XGB), and Artificial Neural Network (ANN) – are used to predict Ra and VB. The input variables of the turning process – feed rate, depth of cut, cutting speed, cutting time, and tool materials – are the major factors affecting surface quality and tool wear. By the error metrics such as root mean squared error (RMSE), mean absolute error (MAE), and coefficient of determination (R 2 ), ANN is found to offer the best predictive performance. An ML and NSGA-II-based approach is then employed for multi-objective optimization of cutting parameters in Ti 6 Al 4 V turning. Fifty Pareto solutions are identified in the range of Ra and VB between (1.332 and 1.441 μm) and (0.100 and 0.125 mm), respectively. In this work, the Pareto solutions are selected based on their ranked performances. This aligns with the decision criterion employed to select the most robust cutting parameters. The definitive optimal Ra and VB are obtained by formulating a robust decisive multi-criterion function which integrates performance, preferred decision criterion, and trustworthiness. Finally, this produces the optimal solution for Ra and VB − 1.439 μm and 0.100 mm, respectively. Experimental validation confirms that the final optimum solution is within the acceptable range.

Tool Geometries Optimization Based on Machine Learning for Aviation Parts Towards Green Manufacturing

Ensemble transfer learning for cutting energy consumption prediction of aviation parts towards green manufacturing

Pareto Fronts of Machining Parameters for Trade-off among Energy Consumption, Cutting Force and Processing Time

Turning Part Design for Joint Optimisation of Machining and Transportation Energy Consumption

Optimisation of Cutting Parameters for Improving Energy Efficiency in Machining Process

Analysis of Multi-Objective Optimization of Machining Allowance Distribution and Parameters for Energy Saving Strategy

Energy-efficient multi-pass cutting parameters optimisation for aviation parts in flank milling with deep reinforcement learning

Integrated Optimisation of Multi-Pass Cutting Parameters and Tool Path with Hierarchical Reinforcement Learning Towards Green Manufacturing

Optimization of Cutting Parameters Considering Tool Wear Conditions in Low-Carbon Manufacturing Environment

Multi-objective integrated optimization of tool geometry angles and cutting parameters for machining time and energy consumption in NC milling

Energy optimization method for variable curvature contour machining

Multi-objective parameter optimization of CNC plane milling for sustainable manufacturing

Machining comparison of aerospace materials considering minimum quantity cutting fluid: A clean and green approach

Spot-checking machine learning algorithms for tool wear monitoring in automatic drilling operations in CFRP/Ti6Al4V/Al stacks in the aircraft industry

Minimizing the energy consumption of hole machining integrating the optimization of tool path and cutting parameters on CNC machines

Finite element analysis and response surface method for robust multi-performance optimization of radial turning of hard 300M steel

Multi-objective optimization based on machine learning and non-dominated sorting genetic algorithm for surface roughness and tool wear in Ti6Al4V turning

An Intelligent Optimization Approach of Feedrate Scheduling Based on Hybrid Simulation Models

Airfoil Optimization Using a Machine Learning-Based Optimization Algorithm

Prediction of surface roughness and optimization of process parameters for efficient cutting of aluminum alloy

Tool Orientation Optimization Considering Cutter Deflection Error Caused by Cutting Force for Multi-Axis Sculptured Surface Milling