Abstract:Steel-braced concentric frames (SBCFs) are a popular form of structure and has been widely employed in seismic regions owing to their high strength and elastic stiffness; however, the effects of key parameters on the collapse behavior of SBCFs are unclear due to insufficient investigations, which should be further explored in column removal scenarios. To this end, numerical models were employed to explore the key parameters affecting the collapse behavior of SBCFs in this study. The numerical models of steel frames with or without braces were validated based on previous experimental results. According to the refined model, the effects of brace members of various types and with different slenderness ratios on the collapse behavior were illustrated. The results showed that an X brace type with smaller slenderness ratio is the most appropriate for enhancing robustness against progressive collapse. Thereafter, full-scale numerical models were established to investigate the effect of the column removal position, and the results showed that the frame relied purely on flexural action in a side column loss. Moreover, the effect of the position of horizontal brace layers on the collapse behavior was investigated in the middle and side column removal scenarios. To gain deeper insight into the load-resisting mechanisms, the specific contributions to the total resistance of different mechanisms in different stories, bare steel frames and braces, and tensile and compressive braces were separated. Finally, a strategy for the robustness enhancement of high-rise steel frames was empirically proposed, and it was suggested that the provision of a brace layer for approximately every 10 stories would be effective for the anti-collapse design of high-rise buildings.

Analytical Prediction on Static Collapse Resistance of Steel Frames in Multi-Interior-column-removal Scenarios

Collapse Test of Three-Story Half-Scale Reinforced Concrete Frame Building

Collapse tests of RC frame with sudden middle column removal

Experimental Study on Progressive Collapse-Resistant Behavior of Reinforced Concrete Frame Structures

Collapse Resistance of Steel Frames in Two-Side-column-removal Scenario: Analytical Method and Design Approach

Inelastic Storey-Buckling Factor of Steel Frames

Robustness of steel moment frames in multi-column-removal scenarios

Experimental research on a large scale RC frame model subjected to sudden corner column removal

Progressive Collapse of Steel Moment-Resisting Frame Subjected to Loss of Interior Column: Experimental Tests

Study on Collapse Mechanism of Steel Frame with CFST-columns under Column-Removal Scenario

A simplified approach for collapse assessment of multi-Storey steel framed-structures with one column loss

Testing and Analysis on Progressive Collapse-Resistance Behavior of RC Frame Substructures under a Side Column Removal Scenario

Numerical Investigation of Progressive Collapse Resistance of Reinforced Concrete Frames Subject to Column Removals from Different Stories

Progressive Collapse Resistance Assessment of a Multi-Column Frame Tube Structure with an Assembled Truss Beam Composite Floor under Different Column Removal Conditions

Experimental and Computational Assessments of Progressive Collapse Resistance of Reinforced Concrete Planar Frames Subjected to Penultimate Column Removal Scenario

Progressive collapse resistance of self-centering infilled precast concrete frame under side column removal scenario

Numerical evaluation on collapse-resistant performance of steel-braced concentric frames

Anti-collapse performance of concrete-filled steel tubular composite frame with RC shear walls under middle column removal

Dynamic progressive collapse of steel moment frames under different fire scenarios

Progressive collapse resistance of composite frame with concrete-filled steel tubular column under a penultimate column removal scenario

Progressive Collapse Resistance of RC Frames under a Side Column Removal Scenario: the Mechanism Explained