Abstract:Commonly used fiber-reinforced polymer (FRP) includes Carbon, Glass, and Aramid FRP composites. Meanwhile, some new FRPs such as PBO (Polypara-phenylene-Benzo-bis-Oxazole), PET (Polyethylene Terephthalate/Polyester), Dyneema, and Basalt have been gradually applied in recent years. Over the past 20years, there has been extensive research on modeling of stress–strain response of confined concrete using the common types of FRP. In this study, most popular and recent models are investigated to evaluate their general practical application in predicting the response of FRP-confined concrete with strain-hardening performance without any restriction on the fiber used. The aim of the study is twofold. In case of different types of FRP composites, providing equivalent confinement modulus (lateral stiffness), five models are employed to find the FRP-confined concrete stress–strain relationship of three scale-model circular columns. Second ascending part (second stiffness) of the stress–strain relationship of FRP-confined concrete with strain-hardening performance is evaluated in the light of available database from the existing literature using these analytical models. The results showed that the examined models do not satisfy the fact that the slope of the second ascending branch of the stress–strain curve of FRP-confined concrete is independent of its types, provided the design confinement modulus is the same. A comparison of predicted values of the second stiffness with the collected test results of 257 cylinder specimens confined with the common types of FRP composites revealed the necessity for a more accurate model. Based on the discussion of the features and accuracy of these models, a model considering the effect of FRP lateral stiffness is proposed. Because of the variability observed in the test data, however, it appears impossible to develop simple empirical models based on the current database with less than approximately 27% mean absolute error for the second stiffness, and 16% mean absolute error for ultimate strength.

Probabilistic Calibration of Compressive Stress–Strain Models for FRP-Confined Concrete in Square Cross Section Members

Analysis-oriented Stress–strain Models for FRP–confined Concrete

Path-Dependent Stress–Strain Model for FRP-Confined Recycled Brick Aggregate Concrete

Mechanical Properties of SFRC: Database Construction and Model Prediction

Effectiveness of CFRP Confinement and Compressive Strength of Square Concrete Columns

Stress-Strain Behaviour Of Frp-Confined Concrete Subjected To Eccentric Compression

Analysis and Behaviour of FRP-confined Short Concrete Columns Subjected to Eccentric Loading

Assessment of Models of FRP-Confined Concrete Rectangular Columns

Cross-Sectional Unification on the Stress-Strain Model of Concrete Subjected to High Passive Confinement by Fiber-Reinforced Polymer

A stress-path dependent stress-strain model for FRP-confined concrete

FRP-confined concrete in circular sections: Review and assessment of stress–strain models

Comparison of Models for Predicting the Behaviours of FRP Strengthened Concrete Beams Considering Compressive Membrane Action

Analysis of CFRP-confined CFST Columns Reinforced with Steel Angles under Axial Compression

Unified Cyclic Stress–strain Model for Normal and High Strength Concrete Confined with FRP

An Efficient Method for the Compressive Behavior of FRP-confined Concrete Cylinders

Design-oriented Stress-Strain Model for FRP-confined Ultra-High Performance Concrete (UHPC)

Evaluating and proposing models of circular concrete columns confined with different FRP composites

A unified stress-strain model for LRS FRP-confined concrete columns with square and circular cross-sections

Axial Stress-Strain Model for Concrete in Partially FRP Wrapped Reinforced Concrete Columns

Modeling for complete stress-strain curve of circular concrete columns confined with steel spiral and FRP

Design-oriented Axial Stress–strain Model for Partially Fiber-Reinforced-polymer-confined Normal-Strength Concrete