Abstract:Li metal is considered as the “Holy Grail” of energy storage systems due to its extremely high theoretical specific capacity (3860 mAh g−1), low gravimetric density (0.59 g cm−3), and lowest negative redox potential (−3.040 V vs. standard hydrogen electrode). The bright prospects give rise to worldwide interests in the metallic Li for the next generation energy storage systems, including highly considered rechargeable metallic Li batteries such as Li-O2 and Li-sulfur (Li–S) batteries. However, the formation of Li dendrites induced by inhomogeneous distribution of current density on the Li metal anode and the concentration gradient of Li ions at the electrolyte/electrode interface is a crucial issue that hinders the practical demonstration of high-energy-density metallic Li batteries. A unique nanostructured anode with Li metal distributed in fibrous Li7B6 matrix is proposed as a promising anode to prevent the dendrite growth. The nanostructured anode is with a large specific area, thus rendering a low current density on the Li metal anode. The dendrite growth is effectively inhibited via decreasing the growth velocity of Li deposits and then limiting the final size of deposited Li on the nanostructured matrix, thus leading to the dendrite-free morphology at macroscale. The concentration gradient of Li ions near the anode surface are sharply reduced, because the 3D Li7B6 fibrous structure provides quantities of free space to accommodate electrolyte. To improve the Coulombic efficiency of Li depositing/dissolution, a dual-phase Li metal anode containing polysulfide-induced SEI and nanostructured graphene framework was investigated for Li-S batteries. Free-standing graphene foam provides several promising features as underneath layer for Li anode, including (1) relative larger surface area than 2D substrates to lower the real specific surface current density and the possibility of dendrite growth, (2) interconnected framework to support and recycle dead Li, and (3) good flexibility to sustain the volume fluctuation during repeated incorporation/extraction of Li. The synergy between the LiNO3 and polysulfides provides the feasibility to the formation of robust SEI in an ether-based electrolyte. The efficient in-situ formed SEI-coated graphene structure allows stable Li metal anode with the cycling Coulombic efficiency of ∼97 % with high safety and efficiency performance, which is with a low resistance of 19.65 Ω (29.10 Ω for Cu foil based Li metal anode) and high ion conductivity of 5.42×10-2 mS cm-1 (2.33×10-2 mS cm-1 for Cu foil based Li metal anode). These results indicated that interfacial engineering of nanostructured electrode were a promising strategy to handle the intrinsic problems of Li metal anodes, thus shed a new light toward LMBs, such as Li-S and Li-O2 batteries with high energy density. Reference [1] X. B. Cheng, H. J. Peng, J. Q. Huang, F. Wei, Q. Zhang, Small 2014, 10, 4257 [2] X. B. Cheng, H. J. Peng, J. Q. Huang, R. Zhang, C. Z. Zhao, Q. Zhang, ACS Nano 2015, 9, 6373

Building a House for Stabilizing Lithium‐Metal Anodes

Realizing Holistic Charging–Discharging for Dendrite-Free Lithium Metal Anodes Via Constructing Three-Dimensional Li+ Conductive Networks

An Ultrastable Lithium Metal Anode Enabled by Designed Metal Fluoride Spansules

An Interconnected Silver Coated Carbon Cloth Framework As a Host to Reduce Lithium Nucleation Over-Potential for Dendrite-Free Lithium Metal Anodes

Nanoarray Architecture of Ultra-Lithiophilic Metal Nitrides for Stable Lithium Metal Anodes

Modifying surface of Ni foam via hierarchical lithiophilic nanoarrays for stable lithium metal anodes

Stable Li Metal Anode with Protected Interface for High-Performance Li Metal Batteries

Constructing Porous Nickel-Zinc Alloy Layer on Nickel Foam for Dendritic-Free Lithium Metal Anode

Coupling a Three-Dimensional Nanopillar and Robust Film to Guide Li-Ion Flux for Dendrite-Free Lithium Metal Anodes

Lithiated NiCo2O4 Nanorods Anchored on 3D Nickel Foam Enable Homogeneous Li Plating/Stripping for High-Power Dendrite-Free Lithium Metal Anode

Stable Lithium Metal Anode Enabled by a Lithiophilic and Electron/Ion Conductive Framework

Regulating the Li Nucleation/Growth Behavior via Cu 2 O Nanowire Array and Artificial Solid Electrolyte Interphase toward Highly Stable Li Metal Anode

Building Artificial Solid‐Electrolyte Interphase with Uniform Intermolecular Ionic Bonds toward Dendrite‐Free Lithium Metal Anodes

Lithium–matrix Composite Anode Protected by a Solid Electrolyte Layer for Stable Lithium Metal Batteries

In situ constructing lithiophilic and Ion/Electron Dual-Regulated current collector for highly stable lithium metal batteries

Revisiting the Role of Physical Confinement and Chemical Regulation of 3D Hosts for Dendrite-Free Li Metal Anode

Synergistic effect of LixSi/Li3N artificial interface and 3D framework for enabling Dendrite-free, long-life lithium metal anodes

Highly lithiophilic ZnO nanosheets decorated Ni foam as a stable host for high-performance lithium metal anodes

Constructing nanoporous Ni foam current collectors for stable lithium metal anodes

Nanostructured Li Metal Anode to Inhibit Dendrite Growth in Safe Li-Metal Batteries

Free-standing films of nickel nanowires anchored with Ni3S2 nanosheets for stable Li anodes