Abstract:Dispersion nuclear fuel elements have promising prospects to be used in advanced nuclear reactors and disposal of nuclear wastes. They consist of fuel meat and cladding, and the fuel meat is a kind of composite fuel in which the fuel particles are embedded in the non-fissile matrix. Prediction of the micro-thermo-mechanical behaviors in dispersion nuclear plates is of importance to their irradiation safety and optimal design. In this study, the heterogeneity of the fuel particles along the thickness direction in the fuel meat is considered. The 3D finite element models have been developed respectively for two cases: (1) variation of fuel particle-particle (PP) distances for the particles near the mid-plane of the fuel meat; (2) variation of the particle-cladding (PC) distances for the fuel particles near the interface between the fuel meat and the cladding. The respective finite strain constitutive relations are developed for the fuel particle, metal matrix and cladding. The developed virtual temperature method is used to simulate irradiation swelling of the fuel particles and irradiation growth of the metal cladding. Effects of the heterogeneous distributions of the fuel particles on the micro temperature fields and the micro stress-strain fields are investigated. The obtained results indicate that: (1) as a whole, the maximum Mises stress, equivalent plastic strain and first principal stress at the matrix between the two closest particles increase with decreasing the particle-particle (PP) distance; existence of large first principal stresses there may be the main factor that induces the matrix failure; (2) variation of the particle-cladding (PC) distance has remarkable effects on the interfacial normal stress and shear stress at the interface between the fuel meat and the cladding; the first principal stress at the cladding near the interface increases dramatically when the fuel particle is closer and closer to the cladding. Thus, the proper distance between the fuel particles and the one between the fuel particle and the cladding should be considered in the optimal design; (3) the micro temperature distribution in the fuel element is hardly affected. (C) 2011 Elsevier B.V. All rights reserved.

Effective Elastic Moduli of the Solid Microencapsulated Fuel in Light Water Reactors

Investigation on the Irradiation-thermal–mechanical Coupling Behaviors of the Solid Microencapsulated Fuel Rod

Heat Transfer Performance of the Solid Microencapsulated Fuel in Light Water Reactors

Thermal Hydraulic Design and Evaluation of the Solid Microencapsulated Fuel in Light Water Reactors

Neutronic Design and Evaluation of the Solid Microencapsulated Fuel in LWR

Effects of the Mesostructures and Irradiation Conditions on the Thermo-Mechanical Coupling Behaviors in LWR-used Fully Ceramic-Microencapsulated Fuel Pellets

Modeling of Irradiation-Induced Thermo-Mechanical Coupling and Multi-Scale Behavior in a Fully Ceramic-Microencapsulated Fuel Pellet

Modeling of irradiation-induced thermo-mechanical coupling behavior in metal matrix microencapsulated fuel

Models for Effective Elastic Constants of Irradiated U-10Mo Fuels with Distributed Fission Gas Bubbles

Mechanical Behaviors of the Dispersion Nuclear Fuel Plates Induced by Fuel Particle Swelling and Thermal Effect I: Effects of Variations of the Fuel Particle Volume Fractions

Effects of the Key Parameters of TRISO Particle Buffer Layer on In-Pile Thermo-Mechanical Behavior in FCM Fuel Pellets

Analysis of Gas-Cooled Micro Modular Reactor (MMR) Fuel

Numerical study on the interface debonding effect on FCM fuel behavior

Modelling of effective irradiation swelling for inert matrix fuels

Effects of Matrix Creep Properties on Effective Irradiation Swelling of U-10Mo/Zr Dispersion Nuclear Fuels

Effects of Fission Heat and Fuel Swelling on the Thermal-mechanical Behaviors of Dispersion Fuel Elements

Numerical Simulation Research on the Irradiation-Thermal-Mechanical Performance Evolution of FCM Fuel

Irradiation-Thermal-Mechanical Coupling Behaviors of a Typical TRISO/SiC Fuel Element Based on Actual Distribution

Effects of Particle Volume Fraction on the Macro-Thermo-Mechanical Behaviors in Plate-Type Dispersion Nuclear Fuel Elements

Prediction of the Micro-Thermo-mechanical Behaviors in Dispersion Nuclear Fuel Plates with Heterogeneous Particle Distributions

Macro-Mesoscale In-Pile Thermal-Mechanical Behavior Simulation of a UMo/Zr Monolithic Fuel Plate