Abstract:Mechanisms of powder magnesium and carbon dioxide combustion are required for the concept of Mars propulsion based on the perspective of in-situ resource utilization. Most current characterizations are based on laboratory experiments conducted in stationary or simple flow configuration. However, the chamber condition in most applications of engine is very complicated with high pressure and multi-phase flow environment, and the combustion process in engine-scale has not been established. The burning efficiency, combustion stability and excessive deposition are the mainly primary issues that limit the combustion performance in rocket environment, the experimental study aims at combustion characteristics and the affection mechanism of powder magnesium and carbon dioxide in rocket engine. A new configuration of powder rocket system is established. Meanwhile, a multiple-inlet configuration of CO2 injection is designated to control the CO2 injection positions and parameters, such as global and local oxidant-fuel ratio. Ignition process is studied and an empirical model for ignition judgment is established according to the result of ignition tests. Mechanism for combustion deposition is studied by the analysis of morphology, composition and distribution, characteristics of combustion efficiency are estimated based on test pressure and thermodynamic calculation, and oscillation mechanism of combustion pressure is obtained by frequency domain analysis. The higher concentration of magnesium particle, the cool CO2 injection and the increasing of CO concentration is supposed to be the main reasons for the deposition in different areas along the axis of the combustion chamber. The allocation of gas injection is an important factor that affects the combustion sufficiency associated to the heterogeneous reaction. Raising the O/F ratio in chamber head is an effective way to improve combustion efficiency for rocket engine, and the efficiency is improved firstly and then is decreased with increasing flow rate of fluidization gas. The low frequency oscillation is supposed to be related to flame instability induced by the gas injection in chamber head. The influence caused by primary and secondary gas injection are further analyzed in the frequency domain, the related characteristic bands are classified and the fluctuation tendency is obtained.

Effects of Near Wall Flow and Non-equilibrium Reaction Coupling on Heat Flux Prediction Inside a 7-Elements GOX/GCH4 Combustion Chamber

Modeling of a 7-Elements GOX/GCH4 Combustion Chamber Using RANS with Eddy-Dissipation Concept Model

RANS based numerical simulation of a GCH4/GO2 rocket engine combustion chamber with film cooling and improvement of wall heat flux prediction

Numerical study of film cooling in single-element injector gaseous CH4/O2 rocket engine with coupled wall function

Detailed Numerical Simulation of Transient Mixing and Combustion of Premixed Methane/air Mixtures in a Pre-Chamber/main-chamber System Relevant to Internal Combustion Engines

Coupled Numerical Simulation of Combustion and Regenerative Cooling in Lox/Methane Rocket Engines

Wall Heat Flux Measurements in a GO(2)/GH(2) Heat-Sink Combustion Chamber

Numerical Simulation of Reacting Flow in the Combustion Chamber and Study of the Impact of Turbulent Diffusion Coefficients

Research on Blending Combustion Characteristics of Coaxial Injector of Oxygen/methane Engine

Effects of Injector Geometric Parameters on the Combustion and Heat Transfer Process Inside a 7-Elements Methane Combustion Chamber

Experimental study on combustion characteristics of powder magnesium and carbon dioxide in rocket engine

Predictions of NOx and CO emissions from a low-emission concentric staged combustor for civil aeroengines

Large eddy simulation of strut enhanced mixing for supersonic combustion

Numerical simulation of combustion in the chamberof a model low-thrust rocket engine operating on the gaseous oxygen–methane components

Numerical Study of High-Pressure GO 2 /GH 2 Combustion of a Single-Element Injector

Impact of chemical modeling on the numerical analysis of a LOx/GCH4 rocket engine pintle injector

The Confirmation of Thermal Boundary Parameters in an Oxygen Kerosene Fuel-Rich Rocket Engine

Unsteady Conjugate Heat Transfer Simulation of Wall Heat Loads for Rotating Detonation Combustor

Velocity-driven Optimization of Film Cooling in Methane/oxygen Rocket Engines Using Coupled Wall Function

Numerical Analysis of Combustion and Film Cooling in LOx-Methane Rocket Engine

Numerical Investigation on Mixing and Combustion of Transverse Hydrogen Jet in a High-Enthalpy Supersonic Crossflow