Abstract:Outstanding mechanical properties of graphene tend to deteriorate as its size increases as a consequence of agglomeration in metal matrix composites. In the present work, a post-process designing technique based on surface modification method is proposed which incorporates micro-level properties of graphene in order to realize its high theoretical strength and stiffness to improve mechanical properties of existing metal/alloy/metal matrix composite structures, hence enhancing their stiffness-to-weight ratio. The design utilizes laser surface texturing (LST) technique to fabricate micro-sized dimples on each surface and interface of plate structures. Graphene nanoplatelets (GNPs) are confined within these micro-dimples to form a graphene-based metal matrix composite. For numerical analysis under static loading and boundary conditions, two novel models are proposed, with different texture depths formed on each of five metal (Ti, Al, Cu, Ni and Mg) plate substrates. The elastic properties of both composite models have been modeled by employing Halpin–Tsai micromechanics framework. The linear 3D theory of elasticity is used as the basis of forming governing differential equations, and they are solved using scaled boundary finite element method (SBFEM). Stress and strain behaviors for all the models as well as substrate plates are discussed in detail, and obtained results in present study are consistent with already available analytical results. Furthermore, a remarkable enhancement in specific-stiffness is seen for proposed models as compared to the pure metal counterparts. The percentage decrement of maximum in-plane strain between pure Mg plate and Mg + GNPs (3.92 vol%) plate is 41.22%, and that between pure Ni plate and Ni + GNPs (3.92 vol%) plate is 7.40%. For both the models, about 97.94% of the top and bottom surface areas are covered with graphene making the composites highly corrosion resistant.

Enhanced Damping Capacity of Nanolaminated Graphene (reduced Graphene Oxide) Al-Mg-Si Composite

Enhanced Damping Capacity in Graphene-Al Nanolaminated Composite Pillars under Compression Cyclic Loading

Improved Mechanical Property of Nanolaminated Graphene (reduced Graphene Oxide)/al–mg–si Composite Rendered by Facilitated Ageing Process

Strengthening and Toughening Mechanisms in Graphene-Al Nanolaminated Composite Micro-Pillars

Strengthening and Deformation Mechanisms in Nanolaminated Graphene-Al Composite Micro-Pillars Affected by Graphene In-Plane Sizes

Strain-rate Dependent Deformation Mechanism of Graphene-Al Nanolaminated Composites Studied Using Micro-Pillar Compression

Impact of Graphene (reduced Graphene Oxide) Incorporation on the Aging Behavior and Mechanical Properties of Al-Mg-Si Alloy

Enhanced Mechanical Properties of Graphene (reduced Graphene Oxide)/Aluminum Composites with A Bioinspired Nanolaminated Structure

Investigation of graphene nanoplatelets-deposited textured metal matrix composite plates for improved mechanical properties: a numerical approach

Impact of the Reduced Graphene Oxide (RGO) on the Ageing Kinetics of Al-Mg-Si Alloy with Different Grain Sizes

A molecular dynamics assisted insight on damping enhancement in carbon fiber reinforced polymer composites with oriented multilayer graphene oxide coatings

Effects of Graphene Surface Morphology on Damping Properties of Epoxy Composites

Damping and mechanical behavior of graphene nanoplatelets reinforced Al-30Zn alloy matrix bioinspired laminated composites by two steps flake powder metallurgy

Grain Boundary-Assisted Deformation in Graphene–al Nanolaminated Composite Micro-Pillars

Novel laminated multi-layer graphene/Cu–Al–Mn composites with ultrahigh damping capacity and superior tensile mechanical properties

Correlating Micro-Pillar Compression Behavior with Bulk Mechanical Properties: Nanolaminated Graphene-Al Composite As a Case Study

Microstructure Characterization and Damping Behavior of the Novel Graphene Oxide/tini Laminate Composite Sheet

Effects of multi walled carbon nanotubes and multilayer graphene on the damping and quasi-static compressive mechanical properties of novel EP/ZA22 composites

Lateral Size Effect of Graphene on Mechanical Properties of Aluminum Matrix Nanolaminated Composites

Strength-ductility Synergy of Reduced Graphene Oxide/2024al Matrix Composites by Heterogeneous Structure Design and Hybrid Nanoparticles Optimized Interface

Interfacial Effect on the Deformation Mechanism of Bulk Nanolaminated Graphene-Al Composites