Abstract:Tungsten (W) is recognized as primary candidate for plasma facing materials (PFMs) due to its excellent physical properties, such as high melting temperature, good thermal conductivity, low sputtering and low tritium retention rate. However, W PFM will suffer strong irradiation flux by hydrogen isotope (HI), Helium (He) ash and neutrons, which may result in radiation damage, bubble formation, and hence deteriorating the fuel retention problem. ITER requires the tritium inventory in the PFM to be controlled below 700 g for safety and economic reasons [1]. Therefore, the prediction and controlling of tritium (T) inventory in PFMs is a critical issue for future fusion devices. In the fusion reactor, the helium (He) ash, as the production of deuterium-tritium reaction, will also be implanted into the PFMs accompanying with fuel particle. The coexistence of HI and He particles will complicate the retention problem mainly due to the formation of Heinduced microstructure, as showed in Figure 1. Understanding the interactions of HI, He and He-induced microstructure is important to predict and control the T inventory. In our previous works, a HIIPC [2] based on rate theory has been developed to simulate the hydrogen isotope (HI) transport and retention in tungsten (W) under low-energy HI particles irradiation. It found that the irradiation damage plays significant roles in the HI retention, and demonstrated the mechanisms of defects evolution as well as material surface effects on the retention [3,4,5]. However, the effects of He and He bubble on HI retention in W have been not taken into account in the previous simulation. Therefore, further developing the HIIPC is necessary for accurately estimating the T inventory in PFMs. Figure 1. The interaction region of fuel particles with W PFM in the fusion environment.

Hydrogen Isotope Inventory Evaluation of Hydrogen Isotopes Separation System of CFETR Using Aspen Plus Simulator

Tritium Fuel Cycle Modeling and Tritium Breeding Analysis for CFETR

Hydrogen Isotope Separation and Simulation Technology with Cryogenic Distillation System

Modeling and Analysis of Tritium Fuel Cycle for Magnetic Confinement Fusion Reactor

Tritium inventory and tritium self-sufficiency of tritium fuel cycle system in Z-pinch driven fusion-fission hybrid reactor (Z-FFR)

Advanced Isotope Separation Technology for Fusion Fuel

Simulation of Hydrogen Isotope Transport and Retention in He implanted Tungsten

Tritium Safety and Confinement Loop Design of Tritium Plant in a FPP

Tritium Transportation Modeling and Analysis for Tritium Extraction System of HCSB Blanket

Preliminary Safety Analysis of Tritium Source Term for the CFETR Tritium Plant

Modelling Of Hydrogen Isotope Inventory In Mixed Materials Including Porous Deposited Layers In Fusion Devices

Numerical Simulation of Tritium Behavior under a Postulated Accident Condition for CFETR TEP System

Sensitivity Analysis of Tritium Breeding Ratio and Startup Inventory for CFETR

Insights into Fuel Start‐up and Self‐sufficiency for Fusion Energy: the Case of CFETR

Rate Equations Modeling for Hydrogen Inventory Studies During a Real Tokamak Material Thermal Cycle

Thermal cycling absorption process: A simple, efficient and safe strategy for hydrogen isotope separation

Simulation of Hydrogen Isotope Retention in the Gap of Tungsten Divertor Tiles

Mechanism of Hydrogen Isotope Exchange for Tritium Removal in Plasma-Facing Materials: a Multi-Scale Investigation

Sensitivity Study on Tritium Transport in Water Cooled Solid Blanket of China Fusion Engineering Test Reactor

Preliminary Tritium Transport Analysis for the Water Cooled Ceramic Breeder Blanket System Based on a System Level Code

Design of Integrated Laboratory-Scale Iodine Sulfur Hydrogen Production Cycle at Inet