Abstract:A 3-D-printed lightweight miniaturized dual-band dual-polarized feed module of wireless backhaul systems consisting of a dual-band air-filled waveguide orthomode transducer (OMT) and a shared-aperture conical horn radiator is investigated. The OMT operating in both Ku- and E-bands with a large frequency ratio is realized by combining the turnstile-junction-type and Bøifot-junction-type OMTs sharing a common-mode-composite coaxial port. A design method of the dual-band OMT considering the requirement for a self-supporting geometry in metallic 3-D printing is presented, so that its compact configuration that is difficult to fabricate by traditional milling technology can be fulfilled conveniently in a whole piece with the use of commercial 3-D printing facilities. A millimeter-wave horn with a small radiation aperture is embedded into a larger aperture of a microwave horn. A proper longitudinal offset between them is introduced to guarantee promising radiation characteristics of the shared-aperture scheme in the two bands. By connecting the OMT with the radiator, the proposed dual-band dual-polarized feed module with a weight of only 100 g is manufactured and measured. Excellent performance, involving the wide bandwidths of 46.7% and 31.2% at microwave and millimeter-wave frequencies, a high isolation of almost larger than 40 dB, a high radiation efficiency of about 90%, and stable dual-polarized radiation patterns with low cross polarizations, is confirmed experimentally. Benefitted from the geometric and operating merits, the feed module would be attractive for applications in advanced millimeter-wave and microwave shared-aperture wireless backhaul systems.

Design of Wideband OMT Choke Flanges for Low PIM Satellite Communication Applications

Broad-Band Orthomode Transducers

Wideband Millimeter-Wave Dual-Mode Dual Circularly Polarized OAM Antenna Using Sequentially Rotated Feeding Technique

Phase-tuning Metasurface for Circularly Polarized Broadside Radiation in Broadband

Very Compact Waveguide Orthomode Transducer in the K-Band for Broadband Communication Satellite Array Antennas

Optimization of Asymmetric Orthomode Transducer at Terahertz Frequency

Wideband OAM Generator Design Using a Low Q-Factor and C-Shaped Element

Broadband Reflection-Type Metasurface for OAM Antenna Design

A high-performance compact WR-4 orthomode transducer for wideband communications

Low-Profile Circularly Polarised Loop Antenna Assisted with an Effective Pmc Bandwidth

Multiplexed Millimeter Wave Communication with Dual Orbital Angular Momentum (OAM) Mode Antennas

Improved Design of Flange Mount Coaxial Connector With Low Passive Intermodulation Distortion

A Broadband Dual-Polarized Reflective Metasurface for THz OAM Communication

Millimeter-Wave Three-Dimensional Substrate-Integrated OMT-Fed Horn Antenna Using Vertical and Planar Groove Gap Waveguides

Millimeter-Wave Ultra-Wideband Circularly Polarized OMD Antenna Array Based on Dual-Mode Sequential Rotated Feeding

Designing an omnidirectional horizontally polarized circular patch antenna implementing unequal open‐circuited stubs

Wideband and Low Cross-Polarization Transmitarray Using 1 Bit Magnetoelectric Dipole Elements

A 3-D Printed Lightweight Miniaturized Dual-Band Dual-Polarized Feed Module for Advanced Millimeter-Wave and Microwave Shared-Aperture Wireless Backhaul System Applications

Chiral Metasurface Enabled Circularly Polarized OAM-Generating Folded Transmitarray Antenna with High-Gain Low-Profile and Broadband Characteristics

A Ka-Band Dual Circularly Polarized CMOS Transmitter with Adaptive Scan Impedance Tuner and Active XPD Calibration Technique for Satellite Terminal

High efficiency holographic impedance metasurface for dual circular polarized OAM waves