Abstract:Metal halide perovskites have received much attention for their application in light-emitting diodes (LEDs) in the past several years. Rapid progress has been made in efficient green, red, and near-infrared perovskite LEDs. However, the development of blue perovskite LEDs is still lagging far behind. Here, we report efficient sky-blue perovskite LEDs by rearranging low-dimensional phase distribution in quasi-2D perovskites. We incorporated sodium ions into the mixed-Cl/Br quasi-2D perovskites with phenylethylammonium as the organic spacer and cesium lead halide as the inorganic framework. The inclusion of the sodium ion was found to significantly reduce the formation of the n = 1 phase, which was dominated by nonradiative transition, and increase the formation of other small-n phases for efficient exciton energy transfer. By managing the phase distribution, a maximum external quantum efficiency (EQE) of 11.7% was achieved in the sky-blue perovskite LED, with a stable emission peak at 488 nm. Further optimizing the phase distribution and film morphology with Pb content, we demonstrated the sky-blue devices with the average EQE approaching 10%. This strategy of engineering phase distribution of quasi-2D perovskites with a sodium ion could provide a useful way for the fabrication of high-performance blue perovskite LEDs.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsnano.0c03765?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsnano.0c03765</a>.Lifetime parameters for different perovskite films calculated from TRPL decay, summarized performance of perovskite LEDs with different EMLs for comparison, absorption and PL spectra of 3D perovskites with mixed CsCl and CsBr, performance of perovskite LEDs by adding different content of PEABr, calculated formation energies of 2D perovskites, performance of cross-checked devices based on 1.1PbBr2, PL spectra of quasi-2D perovskite films with 20% CsBr replacing 20% NaBr, XPS and UPS spectra of perovskite films without and with 20% NaBr, device performance of perovskite LEDs by adding different content of NaBr, SEM and AFM images of different quasi-2D perovskite films, absorption, PL, XRD spectra, and TRPL decay of perovskite films with 1.0 PbBr2 and 1.1 PbBr2, photographs of operating perovskite LEDs and their corresponding EMLs under ultraviolet lamp, device performance of perovskite LEDs with various excess PbBr2 and 1.1PbBr2 but different content of NaBr, and stability of EL spectra of perovskite LEDs driven by voltage (<a class="ext-link" href="/doi/suppl/10.1021/acsnano.0c03765/suppl_file/nn0c03765_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

The Phase-Controllable Crystallization Induced by Low Pressure Flashing in Chloride Anion Doped Quasi-2D Hybrid Perovskite Thin Films for Blue Light-Emitting Diodes

Kinetic Control of Perovskite Thin-Film Morphology and Application in Printable Light-Emitting Diodes

Regulating Perovskite Crystallization through Interfacial Engineering Using a Zwitterionic Additive Potassium Sulfamate for Efficient Pure‐Blue Light‐Emitting Diodes

Manipulating Crystallization Dynamics for Efficient and Spectrally Stable Blue Perovskite Light‐Emitting Diodes

Phase Engineering Reinforced Energy Transfer for High-Performance Blue Perovskite Light-Emitting Diodes

Co‐Interlayer Engineering for Homogenous Phase Quasi‐2‐D Perovskite and High‐Performance Deep‐Blue Light‐Emitting Diodes

Controlling the Phase Distribution of Single Bromide Quasi-2-Dimensional Perovskite Crystals via Solvent Engineering for Pure-Blue Light-Emitting Diodes

Phase Distribution Management for High-Efficiency and Bright Blue Perovskite Light-Emitting Diodes

Partially Ionized Amino Acid Salt Enabling Spatially Vertical n‐Phase Distribution of Quasi‐2D Perovskite for Efficient Deep‐Blue Light‐Emitting Diodes

Suppressing phase disproportionation in quasi-2D perovskite light-emitting diodes

Simultaneous Low-Order Phase Suppression and Defect Passivation for Efficient and Stable Blue Light-Emitting Diodes

Control of n -Phase Distribution in Quasi Two-Dimensional Perovskite for Efficient Blue Light-Emitting Diodes

Halide Homogenization for High-Performance Blue Perovskite Electroluminescence

Phase Regulation and Defect Passivation Enabled by Phosphoryl Chloride Molecules for Efficient Quasi-2D Perovskite Light-Emitting Diodes

Effect of chloride Ion concentrations on luminescence peak blue shift of light-emitting diode using anti-solvent extraction of quasi-two-dimensional perovskite

Rearranging Low-Dimensional Phase Distribution of Quasi-2D Perovskites for Efficient Sky-Blue Perovskite Light-Emitting Diodes

Phosphonic Chloride Assisted Fabrication of Highly Emissive Mixed Halide Perovskite Films in Ambient Air for Blue Light-Emitting Diodes

Chloride-incorporated quasi-2D perovskite films via dynamic processing for spectrum-stable blue light-emitting diodes

Homogeneous Phase Distribution in Q‐2D Perovskites via Co‐assembly of Spacer Cations for Efficient Light‐emitting Diodes

High‐n Phase Suppression for Efficient and Stable Blue Perovskite Light‐Emitting Diodes

Regulated Perovskite Crystallization for Efficient Blue Light‐Emitting Diodes via Interfacial Molecular Network