Abstract:The asymmetric electro-hydrostatic actuator (EHA) is a promising distributed hydraulic actuation solution for the more-electric aircraft (MEA). However, the flow asymmetry is a common problem causing the poor position control accuracy and dynamics of EHA. To achieve good flow control in all quadrants and save energy in the assistive quadrants, a digital control four quadrant electro-hydrostatic actuator with a separated hydraulic motor using a novel four-quadrant division principle was proposed in this article. The theoretical model of the proposed EHA has been developed in MATLAB/Simulink and validated in the experiments. The theoretical results indicated that the increased external force allows the proposed EHA to have a constantly and partly linearly and varied motion velocity of the cylinder piston in the resistive and assistive quadrants, and the latter is determined by the specific external forces of 0.5 and 2.8 kN, respectively, in the extension and retraction quadrants. Compared with EHA without SHM, in the second and fourth quadrants, the energy dissipation is reduced by 104% and 36.7%, respectively, while the motion velocity of the cylinder piston is reduced by 12.9% and 25.6%, respectively. The theoretical and experimental results indicated that the proposed four quadrants division method effectively corrects the misjudgment of quadrants by using the existing four quadrants division method under the lower external force.

Real-time Emulation System Design for Electrical Characteristics of the EHA in Four Quadrant Operation

Simulation Study of EHA with Four-Quadrant Energy Regulation Based on Hydraulic Damping Valve Scheme

Semi-physical Real-Time Test Platform for Aviation Power System

The Designing of Integrated Testing System for the Electric Power System in Large Civil Aircraft

Characteristic investigation of digital control four quadrant electro-hydrostatic actuator with separated hydraulic motor

Power-Hardware-in-the-Loop Motor Emulator under Four-Quadrant Operation Condition

Application of AMESim in Aero-Power Plant System

Design of Cascaded Hybrid Energy Storage System for Airborne Electro-Hydraulic Actuator Loads

Development of a Hardware-in-the-Loop Testbed for Distributed Electric Propulsion System in All-Electric Aircraft

Design, Simulation and Analysis of Integrated Electrical Hydrostatic Actuator

Thermal-hydraulic Modeling and Simulation of the Hydraulic System based on the Electro-hydrostatic Actuator

Design of Avionics System Simulator for the Aircraft Power System Ground Test

Multi-discipline Simulation of Electro-Hydrostatic Actuator with Modelica

Quantitative Comparative Study on the Performance of a Valve-Controlled Actuator and Electro-Hydrostatic Actuator

Application of AMESim in aircraft hydraulic system

Design and research on engine emulation system of HEV power train hardware-in-the-loop simulation platform

A Practical Real-Time Hybrid Simulator for Modern Large HVAC/DC Power Systems Interfacing RTDS and External Transient Program

Behavioural Modelling and Power Quality Simulation of a HVDC Electric Power System for MEA

Electric Machine Emulator in Voltage-Response Mode with Differentiator Compensation

Modeling Simulation and Experimental Research on Electro-hydrostastic Actuator (EHA)

Interface Displacement and Dynamic Phasor Mapping Equivalence Based Hybrid Simulation for HVAC/DC Power Grids