Abstract:CONSPECTUS: To tackle the foreseen energy crisis and serious environmental problem caused by conventional energy resources, solar cells, or photovoltaics (PV), a technology that can directly convert sunlight to electricity has been considered to be one of the most important and cost-effective clean energy techniques that benefit the environment. So far, silicon-based PVs have dominated the market due to mature fabrication techniques and their relatively good power conversion efficiency (PCE) and excellent stability. In the past decades, metal halide perovskite PVs have been a major direction of current PV research owing to their intriguing optoelectronic performance. The record PCE of perovskite PV cells has unprecedently increased from an original 3.8 to 25.5%. The typical structure of a photovoltaic perovskite is ABX(3), where A refers to a monovalent cation such as methylammonium (MA(+)), cesium (Cs+), or formamidinium (FA(+)); B refers to a divalent cation such as Pb2+ or Sn2+; and X refers to a halide anion. In general, a perovskite PV device consists of an active layer of the perovskite absorber, which is connected by a hole-transporting layer (HTL) and an electron-transporting layer (ETL). In the beginning, the strategies to improve the PCEs mainly focused on developing an effective method to grow a smooth and continuous polycrystalline film. After the improvement of the baseline PCE of the perovskite PVs, various techniques were employed to reduce the defects of perovskite formed at grain boundaries and surfaces, further pushing the PCEs of perovskite PV devices to over 20%. In the meantime, the discovery of suitable and low-cost interfacial materials such as electron-transporting materials and hole-transporting materials has appealed to the attention of the perovskite research community to accelerate the commercialization of the perovskite PVs. In this Account, we start from our efforts to develop facile and effective fabrication strategies to obtain smooth and continuous polycrystalline perovskite thin films, including vapor-assisted and moisture-assisted perovskite crystal growth. The strategies and the in-depth mechanisms of preventing the formation of specific detrimental defects accumulated at grain boundaries or the surface are also portrayed by designing various passivation molecules with certain functional groups, such as carbonyl groups, amine groups, or sulfonic groups. Some systematically designed electron- or hole-transporting materials to improve the charge extraction and collection efficiency in perovskite PV devices are discussed as well. Finally, future perspectives for further enhancing the long-term stability and PCE are proposed to accelerate the commercialization of perovskite PV devices in the next decade.

Highly Efficient and Stable ZnO-based MA-free Perovskite Solar Cells Via Overcoming Interfacial Mismatch and Deprotonation Reaction

Antisolvent‐ and Annealing‐Free Deposition for Highly Stable Efficient Perovskite Solar Cells via Modified ZnO

A Polymerization‐Assisted Grain Growth Strategy for Efficient and Stable Perovskite Solar Cells

Tailored Key Parameters of Perovskite for High-Performance Photovoltaics

Efficient, Hysteresis-Free, and Stable Perovskite Solar Cells with ZnO As Electron-Transport Layer: Effect of Surface Passivation

Ameliorating the Interfacial Mismatch of SnO2 and Perovskite Enabling High Mechanical Stability for Flexible Perovskite Solar Cells

Low‐Temperature Solution‐Processed ZnO Electron Transport Layer for Highly Efficient and Stable Planar Perovskite Solar Cells with Efficiency over 20%

Efficient and stable perovskite solar cells based on insulating polymer modified ZnO nanoparticles

Interfacial Dipole Poly(2-ethyl-2-oxazoline) Modification Triggers Simultaneous Band Alignment and Passivation for Air-Stable Perovskite Solar Cells

Interfacial-engineering enhanced performance and stability of ZnO nanowire-based perovskite solar cells

Aluminum-Doped Zinc Oxide As Highly Stable Electron Collection Layer for Perovskite Solar Cells

A Reaction-and-assembly Approach Using Monoamine Zinc Porphyrin for Highly Stable Large-Area Perovskite Solar Cells

High‐Performance Perovskite Solar Cells with Zwitterion‐Capped‐ZnO Quantum Dots as Electron Transport Layer and NH4X (X = F, Cl, Br) Assisted Interfacial Engineering

Organic Ligand‐Free ZnO Quantum Dots for Efficient and Stable Perovskite Solar Cells

Low-temperature aqueous solution processed ZnO as an electron transporting layer for efficient perovskite solar cells

Low‐Temperature Electron Beam Deposition of Zn‐SnOx for Stable and Flexible Perovskite Solar Cells

High-Efficiency, Hysteresis-Less, UV-Stable Perovskite Solar Cells with Cascade ZnO-ZnS Electron Transport Layer.

Ultrasonic vibration imposed on nanoparticle-based ZnO film improves the performance of the ensuing perovskite solar cell

Dual Modification Engineering Enabled Efficient Perovskite Solar Cells with High Open-Voltage of 1.233 V

Enhanced Electronic Quality of Perovskite Via a Novel C-60 O-Quinodimethane Bisadducts Toward Efficient and Stable Perovskite Solar Cells

Zirconium acetate stabilized tin dioxide colloidal quantum dots as multifunctional electron transporting layer for efficient and stable perovskite solar cells