Abstract:Lithium–sulfur (Li–S) batteries are severely hindered by the low sulfur utilization and short cycling life, especially at high rates. One of the effective solutions to address these problems is to improve the sulfiphilicity of lithium polysulfides (LiPSs) and the lithiophilicity of the lithium anode. However, it is a great challenge to simultaneously optimize both aspects. Herein, by incorporating the merits of strong absorbability and high conductivity of SnS with good catalytic capability of ZnS, a ZnS-SnS heterojunction coated with a polydopamine-derived N-doped carbon shell (denoted as ) with uniform cubic morphology was obtained and compared with the ZnS-SnS2@NC heterostructure and its single-component counterparts ( and SnS2@NC). Theoretical calculations, ex situ XANES, and in situ Raman spectrum were utilized to elucidate rapid anchoring-diffusion-transformation of LiPSs, inhibition of the shuttling effect, and improvement of the sulfur electrochemistry of bimetal ZnS-SnS heterostructure at the molecular level. When applied as a modification layer coated on the separator, the cell with optimized lithiophilicity and sulfiphilicity enables desirable sulfur electrochemistry, including high reversibility of 1149 mAh g–1 for 300 cycles at 0.2 C, high rate performance of 661 mAh g–1 at 10 C, and long cycle life with a low fading rate of 0.0126% each cycle after 2000 cycles at 4 C. Furthermore, a favorable areal capacity of 8.27 mAh cm–2 is maintained under high sulfur mass loading of 10.3 mg cm–2. This work furnishes a feasible scheme to the rational design of bimetal sulfides heterostructures and boosts the development of other electrochemical applications.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsnano.1c00270?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsnano.1c00270</a>.Additional experimental sections (materials synthesis, characterizations, and DFT calculations); SEM, TEM, XRD, TG, XPS, BET, and XANES characterizations of the samples; CV curves; discharge–charge profiles and cycle performance of various electrodes; in situ Raman tests; optimized geometries of LiPSs; Tables S1–S6: Li+ diffusion rates, EIS fitting, and comparisons of electrochemical performance (<a class="ext-link" href="/doi/suppl/10.1021/acsnano.1c00270/suppl_file/nn1c00270_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

MOFs Derived ZnSe/N-doped Carbon Nanosheets As Multifunctional Interlayers for Ultralong-Life Lithium-Sulfur Batteries

Two-dimensional Molybdenum Nitride Nanosheets Modified Celgard Separator with Multifunction for LiS Batteries

A Freestanding Flexible Single‐Atom Cobalt‐Based Multifunctional Interlayer Toward Reversible and Durable Lithium‐Sulfur Batteries

Boosting Polysulfide Confinement and Redox Kinetics Via ZnSe/NC@rGO As Separator Modifier for High-Performance Lithium-Sulfur Batteries

Spodumene Nanosheets@zro2-Sio2 Heterostructure Nanofibers Modified Separator for Long-Cycle Lithium-Sulfur Batteries

High areal loading and long-life cycle stability of lithium-sulfur batteries achieved by a dual-function ZnS-modified separator

Functional separator with 1 T/2H-MoSe2 nanosheets decorated nitrogen and sulfur co-doped mesoporous hollow carbon spheres for high-performance Li-S batteries

Ultra‐Dispersed α‐MoC 1−x Embedded in a Plum‐Like N‐Doped Carbon Framework as a Synergistic Adsorption–Electrocatalysis Interlayer for High‐Performance Li–S Batteries

Synergistic Adsorption-Electrocatalysis of 2D/2D Heterostructure Toward High Performance Li-S Batteries

Nitrogen doped hollow carbon nanospheres as efficient polysulfide restricted layer on commercial separators for high-performance lithium-sulfur batteries

Ultrafine Co-Species Interspersed g-C3N4 Nanosheets and Graphene as an Efficient Polysulfide Barrier to Enable High Performance Li-S Batteries

Zn–N Codoped Carbon Nanofiber Interlayer for Anchor and Catalysis of Polysulfides in Lithium–Sulfur Batteries

Modified separators boost polysulfides adsorption-catalysis in lithium-sulfur batteries from Ni@Co hetero-nanocrystals into CNT-porous carbon dual frameworks

A Versatile Metal‐Organic‐Framework Pillared Interlayer Design for High‐Capacity and Long‐Life Lithium‐Sulfur Batteries

Cathode Nanostructuring and Separator Modification for High-Performance Lithium-Sulfur Batteries

ZnS-SnS@NC Heterostructure as Robust Lithiophilicity and Sulfiphilicity Mediator toward High-Rate and Long-Life Lithium–Sulfur Batteries

Hierarchical heterostructure of vacant carbon-box erected MoSe 2-x nanosheets as a functional mediator for high-performance lithium-sulfur batteries

Single Atom Array Mimic on Ultrathin MOF Nanosheets Boosts the Safety and Life of Lithium–Sulfur Batteries

A Bifunctional N-doped Carbon Nanosheet Embedded with VN/Mo2C Heterointerfaces Electrocatalyst for Expediting Sulfur Redox and Lithium Regulation Toward Advanced Li-S Battery

MOF-Derived Bifunctional Co 0.85 Se Nanoparticles Embedded in N-Doped Carbon Nanosheet Arrays as Efficient Sulfur Hosts for Lithium–Sulfur Batteries

Bimetallic Ni–Co MOF@PAN modified electrospun separator enhances high-performance lithium–sulfur batteries