Research on the Dynamic Response of High-Speed Railway Train-Ballastless Track-Bridge System and Train Running Safety under Earthquake
Lingkun CHEN,Lizhong JIANG
DOI: https://doi.org/10.3969/j.issn.1001-4632.2013.01.20
2013-01-01
Abstract:In this paper, based on summing up and absorbing the existing research, the high-speed railway simply supported girder bridge and CRTS II slab ballastless track is taken as an example to analyze the seismic response and running safety of the high-speed train-ballastless track-bridge system subjected to earthquake. The suggested values of the safety running limit values of the high-speed train on bridge under earthquake action are presented. The following research work is done in this paper. (1) The dynamic model of high-speed train (motor car and trailer car) with 38 degrees of freedom for one car is established. The high-speed train is discretized into the multi-rigid-body system with two suspension systems. The car-body, bogie and wheel-set are regarded as rigid body, the connection between car-body and bogie is simulated as the linear spring, so do the connection between bogie and wheel-set. The whole vehicle model is adopted for vehicle model. There are totally 38 degrees of freedom for one car, with each car body and each bogie having 6 degrees of freedom of longitudinal, lateral, vertical, rolling, pitching and yawing movements, and each wheel-set having 5 degrees of freedom of longitudinal, lateral, vertical, rolling and yawing movements respectively. (2) Three-layer ballastless track structure dynamic analysis model including the rail, ballastless track slab and base slab is built up. Three-layer ballastless track structure is discretized into an aggregation with finite elements, the rail, ballastless track slabs and base slabs are brought into high-speed train-bridge system for the first time. The model of high-speed train-ballastless track/rail-bridge is established respectively, and the dynamic calculation is carried out. The results indicate that the constraint influence of the ballastless track can not be ignored, and the ballastless track can effectively improve train running safety. (3) The improved 6-spring model to simulate the pile-soil dynamic interaction is presented. The improved 6-spring model is presented to calculate the vertical and lateral impedance coefficients of the layered soil by the SHAKE 91 program and the improved Penzien model. The fine model of high-speed train-ballastless track-bridge-bearing-pier-pile-soil system is built up, which can accurately analyze the influence of the pile-soil dynamic interaction on the seismic response of high-speed railway bridge. (4) The earthquake action model which is suited to the high-speed railway train-ballastless track-bridge system is established by the use of the PEER-NGA ground motion database and the generated artificial ground motion waves, and the suitability of the earthquake action model is analyzed. The PEER-NGA ground motion waves are introduced to meet the provision of the Code for Seismic Design of Buildings in which the acceleration time-history curves of the strong motion record are specified for seismic checking. Based on the ground motion power spectrum model which can satisfy the conditions eliminating the zero frequency content and limiting the energy exchange of the stochastic processes, the calculated program which can produce artificial ground motion wave in different sites is developed. The calculation results by comparing with the target response spectrum show that the artificial ground motion waves can satisfy the computing requirement of the seismic response analysis of the high-speed train-ballastless track-bridge system. (5) Based on the linearized Hertz contact theory and the Kalker creep theory, the rail, ballastless track slabs and base slabs of the CRTS II slab ballastless track are brought into train-bridge coupled system. The analysis model and method of the high-speed train-ballastless track-bridge coupling vibration to earthquake loading are established. The computer program V1.0 of the high-speed train-ballastless track-bridge system model subjected to earthquake action is developed. In order to verify the correctness of the model and the computer program, dynamic simulation calculation is carried out. The calculation results are compared with the field dynamic test results at the Sui river super-large bridge of Beijing-Shanghai high-speed railway. The results show that the numerical simulation results agree well with test results. The computer program can analyze accurately the dynamic response of the high-speed train-ballastless track-bridge system and train running safety index, and can analyze the seismic response of the train-bridge system. (6) The computer program V1.0 is utilized to do numerical simulation calculation for high-speed railway bridge. The influence laws on the seismic response of high-speed train-ballastless track-bridge system under different running speed, pier height, site conditions, damping ratio and seismic intensity are analyzed. The simulation results indicate that the seismic response of the system is in general suited to the spectrum characteristics of the ground motion due to the excitation action of the strong earthquake. The traveling speed of the train has little influence on the seismic response of the bridge. It has much influence on the lateral and vertical acceleration, lateral wheel-set force, wheel unloading rate and derailment coefficient of train. The pier height has significant influence on the seismic response of the bridge and running safety indexes of the vehicle. The spectrum characteristics of earthquake waves on different sites are different. There are great differences in the seismic response of the train-bridge system under different earthquake. The near-fault effect and the resonance effect of the earthquake can significantly affect the seismic response of the bridge and the train running safety index. The damping ratio of the bridge structure and the earthquake intensity can directly impact the seismic response of train-bridge system. The suggested values of the safety running limit values of high-speed train on bridge under earthquake action are presented under different running speed, pier height, site, damping ratio and seismic intensity.