Abstract:Hydrogen represents a promising renewable fuel, and its broad application can lead to drastic reductions in greenhouse gas emissions. Keeping hydrogen in liquid form helps achieve high energy density, but also requires cryogenic conditions for storage as hydrogen evaporates at temperatures of about 20 K, which can lead to a large pressure build-up in the tank. This paper addresses the unsteady thermal modeling of cryogenic tanks with liquid hydrogen. Considering the liquid and vapor phases in the tank as two nodes with averaged properties, a lumped-element method of low computational cost is developed and used for simulating two regimes: self-pressurization (also known as autogenous pressurization, or pressure build-up in the closed tank due to external heat leaks) and constant-pressure venting (when some hydrogen is let out of the tank to maintain pressure at a fixed level). The model compares favorably (within several percent for pressure) to experimental observations for autogenous pressurization in a NASA liquid hydrogen tank. The two processes of interest in this study are numerically investigated in tanks of similar shapes but different sizes ranging from about 2 to 1200 m3. Pressure and temperature growth rates are characterized in closed tanks, where the interfacial mass transfer manifests initial condensation followed by more pronounced evaporation. In tanks where pressure is kept fixed by venting some hydrogen from the vapor domain of the tank, the initial venting rate significantly exceeds evaporation rate, but after a settling period, magnitudes of both rates approach each other and continue evolving at a slower pace. The largest tank demonstrates a six-times-lower pressure rise than the smallest tank over a 100 h period. The relative boil-off losses in continuously vented tanks are found to be approximately proportional to the inverse of the tank diameter, thus generally following simple Galilean scaling with a few percent deviation due to scale effects. The model developed in this work is flexible for analyzing a variety of processes in liquid hydrogen storage systems, raising efficiencies, which is critically important for a future economy based on renewable energy.

Effect of Gas Injection Mass Flow Rates on the Thermal Behavior in a Cryogenic Fuel Storage Tank

Dynamic Thermal Performance of Cryogenic Liquid Hydrogen Heating from Gas-Liquid Stratification to Supercritical under a Constant Heat Flux Condition: A Two-Step Simulation

Experimental study of self-pressurizing transfer system for cryogenic liquid

Prediction of Dormancy Time of Cryo-Compressed Hydrogen Tank by Considering Dynamic Thermal Boundary

A Volatile Spray Zone Model and Experimentation in a Gas-Solid Fluidized Bed with Liquid Injection

Modeling and Simulation of Cryogenic Propellant Tank Pressurization in Normal Gravity

Numerical Simulation on Interface Evolution and Pressurization Behaviors in Cryogenic Propellant Tank on Orbit

Thermodynamic Analysis of the Effect of Initial Ortho-Hydrogen Concentration on Thermal Behaviors for Liquid Hydrogen Tanks

Numerical Analysis of Temperature Rise Within 70 MPa Composite Hydrogen Vehicle Cylinder During Fast Refueling

Modeling and thermodynamic analysis of thermal performance in self-pressurized liquid hydrogen tanks

Effect of External Heat Input on Fluid Sloshing Dynamic Performance in a Liquid Oxygen Tank

Thermal Models for Self-Pressurization Prediction of Liquid Hydrogen Tanks: Formulation, Validation, Assessment, and Prospects

Thermal stratification and self-pressurization in a cryogenic propellant storage tank considering capillary effect in low-gravity

The Effect of Liquid Hydrogen Tank Size on Self-Pressurization and Constant-Pressure Venting

Theoretical and Experimental Study for Static Evaporation Rate of a Self-Developed Liquid Hydrogen Storage Tank

Thermo-mechanical Investigation of Composite High-Pressure Hydrogen Storage Cylinder During Fast Filling

Numerical Study on Thermodynamic Performance in a Cryogenic Fuel Storage Tank Under External Sloshing Excitation

Impact of Thermo-Physical Model and Mixing Method on the Trans- and Supercritical Injection Simulation of Liquid Hydrogen

Numerical Simulation on the Temperature Rise of Natural Gas Storage Cylinders during Refueling

Theoretical investigation on heat leakage distribution between vapor and liquid in liquid hydrogen tanks

Numerical and Experimental Studies of Working Processes in a Cryogenic Fuelling Tank Coupled with Energy Plant