Abstract:Fouling on the gas-exchange hollow-fiber membrane (HFM) of extracorporeal membrane oxygenation (ECMO) devices by blood components and pathogens represents the major hurdle to their long-term application in patients with lung deficiency or unstable hemodynamics. Although patients are treated with anticoagulants, deposition of blood proteins onto the membrane surface may still occur after few days, leading to insufficient gas transfer and, consequently, to device failure. The aim of this study was to establish an endothelial cell (EC) monolayer onto the gas-exchange membrane of an ECMO device with a view to developing a hemocompatible bioartificial lung. Poly(4-methyl-1-pentene) (PMP) gas-exchange membranes were coated with titanium dioxide (TiO2), using the pulsed vacuum cathodic arc plasma deposition (PVCAPD) technique, in order to generate a stable interlayer, enabling cell adhesion onto the strongly hydrophobic PMP membrane. The TiO2 coating reduced the oxygen transfer rate (OTR) of the membrane by 22%, and it successfully mediated EC attachment. The adhered ECs formed a confluent monolayer, which retained a non-thrombogenic state and showed cell-to-cell, as well as cell-to-substrate contacts. The established monolayer was able to withstand physiological shear stress and possessed a "self-healing" capacity at areas of induced monolayer disruption. The study demonstrated that the TiO2 coating mediated EC attachment and the establishment of a functional EC monolayer. Statement of significance: Surface endothelialization is considered an effective approach to achieve complete hamocompatibility of blood-contacting devices. Several strategies to enable endothelial cell adhesion onto stents and vascular prostheses have already been described in the literature. However, only few studies investigated the feasibility of establishing an endothelial monolayer onto the gas exchange membrane of ECMO devices, using peptides or proteins that were weakly adsorbed via dip coating techniques. This study demonstrated the effectiveness of an alternative and stable titanium dioxide coating for gas-exchange membranes, which enabled the establishment of a confluent, functional and non-activated endothelial monolayer, while maintaining oxygen permeability.

Anticoagulant Biomimetic Consecutive Gas Exchange Network for Advanced Artificial Lung Membrane

A Bionic Controllable Strain Membrane for Cell Stretching at Air–liquid Interface Inspired by Papercutting

Advanced Hemocompatible Polyethersulfone Composite Artificial Lung Membrane with Efficient CO2/O2 Exchange Channel Constructed by Modified Carbon Nanotubes Network

Hollow fiber membrane modification with functional zwitterionic macromolecules for improved thromboresistance in artificial lungs.

Phosphorylcholine/Heparin Composite Coatings on Artificial Lung Membrane for Enhanced Hemo-compatibility

Advanced Amino Acid-Based Biomimetic Janus Membrane for Extracorporeal Membrane Oxygenation

A novel poly (4-methyl-1-pentene)/polypropylene (PMP/PP) thin film composite (TFC) artificial lung membrane for enhanced gas transport and excellent hemo-compatibility

Fast Blood Oxygenation Through Hemocompatible Asymmetric Polymer of Intrinsic Microporosity Membranes

PDMS-based artificial lung membranes with enhanced permeation to overcome the bottleneck in CO2/O2 selectivity

PDMS-based artificial lung membranes with enhanced permeation to overcome the bottleneck in CO 2 /O 2 selectivity

Biomimetic nanoporous oxygenation membranes with high hemocompatibility and fast gas transport property

Hydrophilic modified PES asymmetric membrane via thermal cross-linking for artificial lung application

A Microfluidic Lung-on-a-chip Based on Biomimetic Hydrogel Membrane

Asymmetric Triple‐Functional Janus Membrane for Blood Oxygenation

Biomimetic Gas Channel Constructed for Efficient CO 2 Removal Based on Computational Simulations

In-situ Modified Polyethersulfone Oxygenation Membrane with Improved Hemocompatibility and Gas Transfer Efficiency

Exploration of Modified Polymers of Intrinsic Microporosity (pim) for Extracorporeal Membrane Oxygenator (Ecmo)

Improving the Blood Compatibility and the Gas Permeability of Polyether Ether Ketone Hollow Fiber Membrane Used for Membrane Oxygenator Via Grafting Hydrophilic Components

An endothelium membrane mimetic antithrombotic coating enables safer and longer extracorporeal membrane oxygenation application

Engineering Metal-Covalent Organic Framework-Based Hybrid Oxygenation Membranes for Facilitated Blood-Gas Exchange

Endothelialization and characterization of titanium dioxide-coated gas-exchange membranes for application in the bioartificial lung