Abstract:Due to its simplicity and minimal invasion,light microscopy has been widely applied in biological science,medicine and chemistry. However,as the result of diffraction,the spatial resolution of standard optical microscopy is limited to about half the wavelength of light,with a lateral dimension of around 200 similar to 300 nm and an axial dimension of approximately 500 similar to 700 nm. This diffraction limits the ability of light microscopy to resolve the subcellular organization of individual molecules or molecular complexes. To overcome the resolution barrier of optical microscopy caused by diffraction limit, a variety of superresolution microscopy techniques have been developed over the past 15 years,which significantly improved the resolution of light microscopy to 10 nm. These techniques can be roughly classified into two categories: 1) single-molecule localization microscopy such as stochastic optical reconstruction microscopy and photoactivation localization microscopy,and 2) spatially patterned illumination- based methods,such as stimulated emission depletion microscopy and structured illumination microscopy. These techniques have revolutionized our understanding of the nanoscale world,Bringing new opportunities and challenges to molecular- scale biological research. This review summarizes the multicolor single-molecule localization microscopy techniques developed in the past five years from the perspectives of biological sample preparation and optical system improvement,The basic principles of each technique are explained and their advantages and disadvantages are discussed. According to the type of fluorescent probes select during sample preparation,some multicolor SMLM can be classified into three categories: Activator-free SMLM technology using synthetic dyes,which requires fluorophores that exhibit similar blinking efficiency under identical photoswitching buffer conditions. techniques using probes with both an activator and a reporter fluorophore enable multicolor SMLM using different activation lasers. And spectrally selective activation of the reporter fluorophores and multicolor SMLM by repetitive quenching and labelling biological samples. The addition of optical elements allows different wavelengths to be processed according to the spectral information of a fluorophore and multicolor imaging can be realized through data post-processing. These multicolor SMLM methods are mainly divided into three categories: Ratiometric SMLM, spectrally resolved SMLM and methods based on Point- Spread-Function(PSF)engineering. In Ratiometric SMLM,synthetic dyes can be efficiently excited by the same laser wavelength in the same switching buffer, but exhibit different emission peaks. The emission fluorescence is spectrally separated by a dichroic beam splitter and imaged into two parts of the same camera. Spectrally resolved SMLM separate the emission fluorescence of different dyes through a dispersive device,and records the emission spectrum and position information separately. The last method for multicolor single- molecule localization is PSF engineering. Additional optical elements are used to make the PSF shape vary with the depth of the emitter and the wavelength of the fluorophore. The problem with the Ratiometric approach is that the Crosstalk between channels is higher than in the other two methods. However,an outstanding challenge of the last two techniques is the accurate and precise localization of individual point emitters in densely labelled samples. Finally,we present an outlook on the fast- growing field of multicolor single-molecule localization microscopy. One of the future development directions of multicolor single molecules is the research on probes,including the brighter organic fluorescent dyes or fluorescent proteins and more universal imaging buffers. Further research can also be done on reducing the complexity of the optical system and expanding the field of view of imaging. It can be envisioned that multicolor SMLM will play a more prominent role in biological and medical research for many years to come. We hope that this review can help researchers choose the appropriate multicolor SMLM for their own experiments.

Modulated illumination localization microscopy-enabled sub-10 nm resolution

Optimal Fitting Strategy for Modulated Illumination Localization Microscopy

Review and Prospect for Single Molecule Localization Microscopy

Sub-diffraction Dark Spot Localization Microscopy

From microscopy to nanoscopy via visible light

Fluorescence Interference Structured Illumination Microscopy for 3D Morphology Imaging with High Axial Resolution

Spatial-frequency-shift Enables Integrated Super-Resolution Microscopy: Advance and Perspective

Three-dimensional Multi-Color Optical Nanoscopy at Sub-10-nm Resolution Based on Small-Molecule Organic Probes.

In Vivo Light-Field Encoded Nano-Imaging in a Narrow Space

Progress of Point-Wise Scanning Superresolution Methods

Advances in Sub-20-nm Fluorescence Super-Resolution Microscopy(Invited)

Single-molecule localization microscopy at 2.4-fold resolution improvement with optical lattice pattern illumination

Mechanical-scan-free and multi-color super-resolution imaging with diffractive spot array illumination

Spectrally Resolved Localization Microscopy with Ultrahigh-Throughput

Ultracompact Multimode Meta-Microscope Based on Both Spatial and Guided-Wave Illumination

Structured illumination microscopy for super-resolution and optical sectioning

Mechanical-scan-free multicolor super-resolution imaging with diffractive spot array illumination

Mirror-enhanced Scanning Light-Field Microscopy for Long-Term High-Speed 3D Imaging with Isotropic Resolution

Advances in Multicolor Single-molecule Localization Microscopy (Invited)

Modulated illumination microscopy: Application perspectives in nuclear nanostructure analysis