Abstract:Abstract In semiconductor industry, liquid jet cleaning plays an important role because of its high cleaning efficiency and low environmental load. However, its cleaning mechanism is not revealed in detail because the experimental observation of high-speed and sub-micron droplets is challenging. Furthermore, higher impact velocity may give rise to surface erosion due to water-hammer shock loading from the impingement. To study cleaning mechanisms and surface erosion, numerical simulation of droplet impingement accounting for both viscosity and compressibility is an effective approach. In the previous study, wall-shear-flow generation has evaluated from the simulation of high-speed single droplet impingement. To evaluate more practical model of jet cleaning application, simulation of two droplets simplifying mono-dispersed splay of droplet train is favorable. Here, we numerically simulated impingement of two droplets, which allows for evaluating water-hammer pressure and wall shear stress. We consider the case of two water droplets (200 μm in diameter) that collides continuously, at speed 50 m/s, at the inter-droplet distance from 250 to 400 μm, with a no-slip rigid wall covered with a water layer (100 μm in thickness). The simulation is based on compressible Navier-Stokes equations for axisymmetric flow and the mixture of two components appears in numerically diffusion interface expressed by the volume average and advection equation. The simulation is solved by finite-volume WENO scheme that can capture both shock waves and material interface. In our simulation, the impingement of second droplet impingement gain higher shear stress than the single droplet impingement. At the case that the inter-droplet distance is 300 μm, maximum shear stress is 30.22 kPa (at the second droplet impingement), which is much larger than at the first droplet impingement (8.42 kPa). This result indicates how the second droplet impingement make wall shear flow induced by first droplet impingement stronger. From the parameter study of the inter-droplet distance, we can say that wall shear stress gets stronger as water layer thickness decreases. Furthermore, the maximum wall pressure is 1.96 MPa at the second droplet impingement, which is larger than at the first droplet impingement (1.46 MPa). From this study, the evaluation of surface erosion caused by jet cleaning is expected. The simulation suggests that multiple droplets impingement continuously may gain higher cleaning efficiency, which will give us a fundamental insight into liquid jet cleaning technologies. For further study, simulation of water column impingement and comparing the result of impingement of two droplets are expected.

Dynamics of Micrometer-Sized Droplet Impact on Vertical Walls with Different Surface Roughness

Analyzing the early impact dynamics of single droplets impacting onto wetted surfaces

Numerical study of droplet impact on superhydrophobic vibrating surfaces with microstructures

Molecular Dynamics Simulation of Dual Nanodroplet Impacts on a Cylindrical Surface

Morphological evolution of nano-droplets impinging on cylindrical wall: A molecular dynamics study

Dynamics of Oil Droplet Impacting and Wetting on the Inclined Surfaces with Different Roughness

Study of liquid droplets impact on dry inclined surface

Numerical simulation of moving droplets on vertical walls

Impingement of binary nanodroplets on rough surfaces: a molecular dynamics study

Experimental Study on the Droplet Impact on Solid Surface with Different Roughness

Comparison in High-Speed Droplet Impact Between Single and Multiple Collisions Against a Wall Covered With a Liquid Film

Dynamic Behavior of Impacting Droplet on the Edges of Different Wettability Surface

Droplet breakup and rebound during impact on small cylindrical superhydrophobic targets

Dynamical behavior of droplets transiently impacting on superhydrophobic microstructures

Dynamic behavior of droplet impacting on a moving surface

Simulation and analytical modeling of high-speed droplet impact onto a surface

Interaction between droplet impact and surface roughness considering the effect of vibration

Droplet impact on surfaces with asymmetric microscopic features

Numerical investigation of droplet impact on a solid superhydrophobic surface

Dynamics and Maximum Spreading of Droplet Impact on a Stationary Droplet on the Surface

Impact Dynamics of Binary Off-Center Unequal-Sized Droplets Colliding on a Superhydrophobic Surface