Planar Double-Winding Foreign Object Detection for the EV Wireless Charging System Based on Time-Division Multiplexing
Chenyang Xia,Chenhao Lu,Shuze Zhao,Ziyue Yang,Yuheng Cao,Fuqian Liu,Yuxiang Gao
DOI: https://doi.org/10.1109/tpel.2024.3418978
IF: 5.967
2024-09-02
IEEE Transactions on Power Electronics
Abstract:Metal object detection (MOD) and living object detection (LOD) are essential for ensuring the safe operation of the electric vehicle (EV) wireless charging system. Since most MOD or LOD single-type systems protect the EV wireless charging system incomprehensively, the existing MOD and LOD shared system has problems such as difficulty in acquiring detection signal, and low accuracy for small-sized living objects (LOs). Thus, this article proposes a planar double-winding foreign object detection (FOD) system based on the time-division multiplexing control strategy. First, the planar double-winding FOD system structure is given, and the time-division multiplexing FOD mode switching as well as FOD judgement principle are analyzed. Second, the phase variation of bandpass filter output voltage in the planar double-winding FOD system is analyzed. Third, the sensing coil structure and detecting circuit parameters are optimized. Finally, an experimental platform is built to verify the feasibility. The results show that when MOD and LOD phase thresholds are set to 3 and 20 , respectively, the phase variation is −21.3 , −27.9 , −7 , and 48.3 for a copper plate, aluminum plate, iron plate of 40 × 40 mm2 and one hand. Therefore, the phase variation is larger than the phase threshold, which can effectively detect MO and LO.
engineering, electrical & electronic