Abstract:Cold sintering process (CSP) combines transient liquid phase and/or external pressure to assist the densification of ceramics, the sintering mechanism of which is typically dominated by the "dissolution-precipitation" process. In this work, Na2WO4 center dot 2H(2)O dry powders without liquid water have been used as the "liquid phase" to realize the densification of Na2WO4 ceramics. The effects of sintering parameters on the CSP of Na2WO4 ceramics using Na2WO4 center dot 2H(2)O dry powders are systematically studied, including sintering temperature, external pressure, sintering process time and the amount of Na2WO4 center dot 2H(2)O phase. It is found that the "liquid phase," that is, Na2WO4 center dot 2H(2)O is the key factor for controlling the CSP of Na2WO4 ceramics, and Na2WO4 center dot 2H(2)O hydrate shows an advantage of homogeneous dispersion of liquid water. The sintering temperature affects the densification mechanism involved with plastic deformation and the "dissolution-precipitation," external pressure accelerates the densification process, and enough sintering process time ensures the completion of CSP. Finally, the optimum cold sintering parameters of Na2WO4 ceramics by Na2WO4 center dot 2H(2)O powders are obtained at 150 degrees C and 240 MPa for 60 min with a pretreatment at 150 degrees C for 30 min.

The Effects of Cold Sintering Parameters on the Densification of Na2WO4 Ceramics Using Na2WO4·2H2O Dry Powders