Abstract:Under the action of static bias magnetic field, the magnetized ferrite has a permeability tensor which can be adjusted by the applied magnetic field. In this paper, the absorption properties of bulk gyromagnetic ferrites under different magnetized conditions are studied and the great potential of gyromagnetic ferrite in achieving low frequency electromagnetic wave absorption is demonstrated. Full wave electromagnetic simulations are performed based on the finite element method (FEM). A floquet port is adopted at the top boundary of the unit cell to simulate a normally incident plane wave. The unit cell boundary conditions are used in the x-y plane to simulate a periodic structure. Orthogonality magnetization in plane is utilized to solve the polarization selectivity in the condition of transverse magnetic field. The influence on absorption capacity of discrete ferrite array structure and the coupling effect of ferrite elements with different sizes are also studied in consideration of the size effect. The simulation results show that a thin bulk gyromagnetic ferrite layer whose thickness is only 4 mm can possess frequency as low as 0.48 GHz and reflectivity below –10 dB. Gyromagnetic ferrite presents different absorption properties under longitudinal magnetization and transversal magnetization, and different polarization directions in transversal magnetization as well. When longitudinal bias magnetic field H0 = 200 Oe, the bandwidth of the reflectivity below –10 dB ranges from 0.48 to 1.84 GHz. The resonant absorption frequency can be regulated by adjusting bias magnetic field and the size of ferrite element. In general, a large bias magnetic field leads to a high resonant frequency due to the ferromagnetic resonance frequency positively associated with the applied magnetic field, but a ferrite array consisting of larger size elements provides a lower resonant frequency for the size resonance negatively associated with the size. By introducing the coupling between elements with different sizes, the reflection bandwidth below –10 dB can be effectively extended to above 80% of the sum of the bandwidth possessed by single unit cell, especially 105.7% under transversal bias magnetic field 700 Oe. And the broadening effect is effective in both longitudinal and transverse magnetized state but it will be weaker when the two absorption peaks are closer. To further understand the absorption mechanism of the two-element absorber, the distribution of the electric field, magnetic field and power loss density are examined. The results prove that the two peaks at the lower frequency exactly originates from \begin{document}$ \Delta R = 0$\end{document} and the higher frequency originates from \begin{document}$ \Delta R = 4$\end{document}, and therefore the widened absorption is contributed by the coupled multiple resonances provided by the elements with different sizes.

Manipulating Absorption Properties of Gyromagnetic Ferrite with Bias Magnetic Field

Achieving Low Frequency Electromagnetic Wave Absorption by Gyromagnetic Ferrite

The Effects of Magnetic Biasing Fields on the Far‐field Distributions of Source on Composite Ferrite Media

Determining the Actual Composition of Nb5+–Ni2+ Codoped Barium Ferrites to Controllably Regulate the Microwave Absorbing Properties

Flexible and tunable microwave absorption structures using carbonyl iron@polydimethylsiloxane pillar arrays

Ultrathin Broadband Microwave Absorbers Using Ferromagnetic Films

Tailoring tactics for optimizing microwave absorbing behaviors in ferrite materials

Design and Analysis of a Dynamically Tunable Ultra-Broadband Flexible Microwave Absorber

Gyrotropic Response In The Absence Of A Bias Field

Artificial Faraday Rotation Using Active Metamaterials

Controllable Preparation and Microwave Absorption Properties of Shape Anisotropic Fe3O4 Nanobelts

Research on Broadband Microwave Absorber Containing a 2D Artificial Electromagnetic Material Composed of Cross Section Resonator Sub-Unit Cells Inserting Ferromagnetic Materials

Constructing MXene-based mixed-dimensional structure with multiple interfaces to optimize dielectric-magnetic synergistic effect for effective electromagnetic wave absorption

Designing Tb-doped Mn-Ni-Cu ferrite meta-absorbers for a broad frequency range: Magnetodielectric, physical, reflection loss, and absorptivity characteristics

Magnetic Tuning of Electrically Resonant Metamaterial with Inclusion of Ferrite

Thermal Management by Manipulating Electromagnetic Parameters

Soft matter with magnetically oriented macro - micro structure for improving microwave absorption efficiency

Achieving Excellent Metallic Magnet-Based Absorbents By Regulating The Eddy Current Effect

Confined Magnetic-Dielectric Balance Boosted Electromagnetic Wave Absorption

Highly efficient and broad electromagnetic wave absorbers tuned via topology-controllable metal-organic frameworks

Study on the characteristics of magneto-sensitive electromagnetic wave-absorbing properties of magnetorheological elastomers