Abstract:As typical flow characteristics in a low Reynolds number, laminar separation bubbles (LSBs) and transition to turbulence over airfoils have been extensively studied in recent years. In order to analyze their flow mechanism, numerical investigation using the finite volume method to solve the Reynolds averaged Navier-Stokes equations with a transition Shear Stress Transport (SST) four-equation transition model is performed in this work, combined with the experimental study facilitated by the oil film interferometry technique. Specifically, the transition SST four-equation transition model is solved to simulate the separation location and LSB structure at low Reynolds numbers on a Wortmann FX63-137 airfoil. Good agreement is obtained between the numerical simulation and experimental measurements regarding the separation, transition and reattachment location, aerodynamic coefficients, and overall flow structures. At higher Reynolds numbers of 200 000 and 300 000, similar bubble structures on the airfoil surface are observed, and the location of the bubble moves toward the leading edge of the airfoil by increasing the angle of attack. However, in Reynolds numbers ranging from 300 000 to 500 000, significant changes of the laminar flow separation structures emerge. The flow structure changes from the classical laminar separation bubble to the nonclassical separation flow structure that is composed of a major vortex 1(V1) and a minor vortex 2(V2). Due to the small distance between V1 and V2, it is difficult to distinguish the delicate structure of the two separation bubbles from the classical laminar separation bubble by the experimental method. Published under license by AIP Publishing.

A Galilean Invariant Variable-Based RANS Closure Model for Bypass and Laminar Separation Bubble-Induced Transition

A Novel Local-Variable-based Reynolds-averaged Navier–Stokes Closure Model for Bypass and Laminar Separation Induced Transition

Validation and Analyses of QCR Correction Turbulence Model in Sub-/Super-sonic Inner Flows

Modeling of Surface Roughness Effects on Bypass and Laminar Separation Bubble-Induced Transition for Turbomachinery Flows

Boundary-layer Transition Prediction Using a Simplified Correlation-Based Model

Development of a Computational Fluid Dynamics Compatible Mathematical Model for Boundary Layer Transitional Flows in Low-Disturbance Environment

A Modular RANS Approach for Modeling Hypersonic Flow Transition on an Air-Breathing Configuration

Fully Local Formulation of A Transition Closure Model for Transitional Flow Simulations

Fully Local Transition Closure Model for Hypersonic Boundary Layers Considering Crossflow Effects

Modeling Of Supersonic/Hypersonic Boundary Layer Transition Using A Single-Point Approach

Modelling Flow Transition in a Hypersonic Boundary Layer with Reynolds-averaged Navier-Stokes Approach

Numerical Investigation on Ultra-High-lift Low-Pressure Turbine Cascade Aerodynamics at Low Reynolds Numbers Using Transition-Based Turbulence Models

A modular RANS approach for modelling laminar-turbulent transition in turbomachinery flows

Study On Flow Separation And Transition Of The Airfoil In Low Reynolds Number

Simultaneous Simulation of Transition and Massive Separation by RANS-LES-Tr Model

Transition Effects on Flow Characteristics Around a Static Two-Dimensional Airfoil

Parallel Compatible Transition Closure Model for High-Speed Transitional Flow

A hybrid prediction model for transitional separated flows over rough walls

A Modular Rans Approach for Modeling Hypersonic Flow Transition on A Scramjet-Forebody Configuration

CFD Simulation for Up Flow Jet-Loop Reactors by Use of Bi-Dispersed Bubble Model

Modeling Separated Flow Transition with a Transport Intermittency Model