Abstract:Defect chemistry is critical to designing high performance thermoelectric materials. In SnTe, the naturally large density of cation vacancies results in excessive hole doping and frustrates the ability to control the thermoelectric properties. Yet, recent work also associates the vacancies with suppressed sound velocities and low lattice thermal conductivity, underscoring the need to understand the interplay between alloying, vacancies, and the transport properties of SnTe. Here, we report solid solutions of SnTe with NaSbTe2 and NaBiTe2 (NaSnmSbTem+2 and NaSnmBiTem+2, respectively) and focus on the impact of the ternary alloys on the cation vacancies and thermoelectric properties. We find introduction of NaSbTe2, but not NaBiTe2, into SnTe nearly doubles the natural concentration of Sn vacancies. Furthermore, DFT calculations suggest that both NaSbTe2 and NaBiTe2 facilitate valence band convergence and simultaneously narrow the band gap. These effects improve the power factors but also make the alloys more prone to detrimental bipolar diffusion. Indeed, the performance of NaSnmBiTem+2 is limited by strong bipolar transport and only exhibits modest maximum ZTs ≈ 0.85 at 900 K. In NaSnmSbTem+2 however, the doubled vacancy concentration raises the charge carrier density and suppresses bipolar diffusion, resulting in superior power factors than those of the Bi-containing analogues. Lastly, NaSbTe2 incorporation lowers the sound velocity of SnTe to give glasslike lattice thermal conductivities. Facilitated by the favorable impacts of band convergence, vacancy-augmented hole concentration, and lattice softening, NaSnmSbTem+2 reaches high ZT ≈ 1.2 at 800-900 K and a competitive average ZTavg of 0.7 over 300-873 K. The difference in ZT between two chemically similar compounds underscores the importance of intrinsic defects in engineering high-performance thermoelectrics.

Compromise of Thermoelectric and Mechanical Properties in LiSbTe2 and LiBiTe2 Alloyed SnTe

Achieving Both Low Lattice Thermal Conductivity and High Hardness by the Design of Bonding Structure

Band and Scattering Tuning for High Performance Thermoelectric Sn1−xMnxTe Alloys

Thermoelectric Enhancements in PbTe Alloys Due to Dislocation‐Induced Strains and Converged Bands

Mechanical alloying boosted SnTe thermoelectrics

Multiple Effects Promoting the Thermoelectric Performance of SnTe by Alloying with CuSbTe2 and CuBiTe2.

Achieving Ultralow Lattice Thermal Conductivity and High Thermoelectric Performance in SnTe by Alloying with MnSb 2 Se 4

Advancing thermoelectrics by vacancy engineering and band manipulation in Sb-doped SnTe–CdTe alloys

Manipulation of Band Structure and Interstitial Defects for Improving Thermoelectric SnTe

Thermoelectric SnTe with Band Convergence, Dense Dislocations, and Interstitials Through Sn Self-Compensation and Mn Alloying.

Contrasting SnTe-NaSbTe2 and SnTe-NaBiTe2 Thermoelectric Alloys: High Performance Facilitated by Increased Cation Vacancies and Lattice Softening

Enhanced thermoelectric performance of SnTe alloy with Ce and Li co-doping

Approaching the Minimum Lattice Thermal Conductivity of P-Type SnTe Thermoelectric Materials by Sb and Mg Alloying.

Synergistically Promoted Thermoelectric Performance of SnTe by Alloying with NaBiTe2

Interstitial Defects Facilitate Dense Dislocations and Band Convergence for High Thermoelectric Performance in SnTe

Improved Solubility in Metavalently Bonded Solid Leads to Band Alignment, Ultralow Thermal Conductivity, and High Thermoelectric Performance in SnTe

Synergistically optimized electrical and thermal transport properties of SnTe via alloying high-solubility MnTe

Low Lattice Thermal Conductivity by Alloying SnTe with AgSbTe2 and CaTe/MnTe

Strong lattice anharmonicity securing intrinsically low lattice thermal conductivity and high performance thermoelectric SnSb2Te4 via Se alloying

Cooperative regulation of electrical and thermal transport behavior enhancing the thermoelectric performance of SnTe

High-Performance SnTe Thermoelectric Materials Enabled by the Synergy of Band Convergence and Phonon Scattering