Abstract:In this paper, a single layer polarization converting metasurface (PCMS) is designed and analyzed for wideband and high efficient cross polarization conversion (CPC) and radar cross section reduction (RCSR). In reflection mode, the PCMS efficiently converts a linearly-polarized (LP) incident electromagnetic (EM) waves to cross-polarized (CP) EM waves from 8.5 to 25.5 GHz with a fractional bandwidth (FBW) of 100%. The polarization conversion ratio (PCR) is more than 90% in the operating band which covers X , Ku , and a portion of K band. There are three resonance frequencies of 9.3, 16.8, and 24.5 GHz over which 100% PCR has been achieved. The unit cell dimensions are 0.2λo×0.2λo (6.8 mm × 6.8 mm) and the height of the substrate is 0.085λo (3 mm), where λo is free space maximum wavelength at the minimum frequency of the operating band. The designed metasurface also performs RCS reduction in chessboard-like array arrangement based on the polarization conversion capability of the proposed PCMS. This method lifts the limitations with conventional techniques such as narrow bandwidth, larger size, and complex to design. The designed array produce a phase difference of (180±37°) between the scattered EM waves which fulfills the criteria for RCS reduction. The different orientations of the same unit cell in the chessboard shaped array result in a different reflection phases. The phase difference between reflected EM waves result in scatter wave cancellation (destructive interference) in the source direction and hence RCS reduction. The PCMS achieves RCSR of less than 10 dB from 6.9 to 25 GHz with a FBW of 114%. The array surface is tested experimentally. Simulated and experimental results are quite similar. The designed PCMS has a great potential in the fields of low RCS and wireless communication.

The W-Band Substrate-based Polarized Grid Radome

A Polarization Conversion Radome for High-Power Microwave Applications

Design and Characterization for Dual-Band and Multi-Band A-sandwich Composite Radome Walls

Design of an Invisible Radome by Frequency Selective Surfaces Loaded with Lumped Resistors

Intelligent Radome Design With Multilayer Composites to Realize Asymmetric Transmission of Electromagnetic Waves and Energy Isolation

Intelligent Radome Design Using Multilayer Metamaterial Structures to Realize Energy Isolation and Asymmetric Propagation of Electromagnetic Wave

Dual-Band A-Sandwich Radome Design for Airborne Applications

Design of Dual-Band Composite Radome Wall With High Angular Stability Using Frequency Selective Surface

Switchable Complementary Diamond-Ring-Shaped Metasurface for Radome Application

Design and simulation of energy selective radome integrated with monopole antenna

Design, optimization, and comparative analysis of wide-band polarization conversion along with dual coding sequences for RCS reduction

Ultrawideband Frequency Selective Radome Utilizing 2.5-D Lossy Layers

Broadband low-scattering and high-efficiency transmission radome by combining phase gradient metasurface and FSS

Design for Broadband High-Temperature Radome Wall with Graded Porous Structure

Wideband and high efficient polarization conversion and RCS reduction based on compass needle shape metasurface

A Broadband Ultra-Thin Polarization Rotator Using Periodically Loaded Parallel Strip-Lines

High Performance 5G Antenna Radome Based on Absorptive Meta-surface

Variable Thickness Airborne Radome Design Considering Thickness Profile Control and Additional Electromagnetic Performance

Electrical Performance of a Dual-Band Composite Radome

Janus Metasurface for Super Radome with Asymmetric Diffusion and Absorption

The Physical Optics Analysis Method for Ultra-wideband Airborne Radome