Abstract:Transition is a prominent flow phenomenon in turbomachinery, especially at low and moderate Reynolds numbers. The turbomachinery internal flow often encounters complex vortex structures, typically accompanied by strong turbulence anisotropy and non–equilibrium. Conventional Reynolds–averaged Navier–Stokes (RANS) modeling with linear eddy–viscosity models (LEVMs) may fail short in capturing certain complex flow features. The Reynolds stress model (RSM) based on a higher turbulence closure level has more potential to reasonably consider turbulence anisotropy and non–equilibrium for such complex flows within turbomachinery than the LEVMs. However, the current RSM lacks an effective representation of transition phenomena. This paper presents an improved prediction of turbomachinery flows using RSM with transition modeling. The transition effects are incorporated into the RSM (SSG/LRR–ω model) via Menter's γ transport equation. The blending of the SSG/LRR–ω model with the γ transition model (SSG/LRR–ω–γ model) is firstly validated based on the T3 series flat plate cases with zero pressure gradient (T3A, T3B, T3A–) and variable pressure gradients (T3C1–C5). Comparisons with experiments show that the SSG/LRR–ω–γ model predicts corner separation flows with transition more accurately, although there is still room for further improvement. Then, the performance of the SSG/LRR–ω–γ model is assessed in a linear highly loaded prescribed velocity distribution (PVD) cascade and a NACA65 K48 compressor cascade. Comparisons with experiments indicate that, in both compressor cascades, the SSG/LRR–ω–γ model can predict more accurately corner flows with boundary layer transition on suction surfaces than the SSG/LRR–ω and SST model. Nevertheless, it still exhibits a tendency to overestimate the size of corner separation, especially in cases characterized by strong adverse pressure gradients. Comparisons of skin friction and velocity profiles predicted by the SSG/LRR–ω model with and without transition modeling illustrate the rationale behind the improved prediction. Further improvement of the SSG/LRR–ω–γ model for predicting turbomachinery corner flows should be conducted in future.

Mechanism and Performance Differences Between the SSG/LRR-ω and SST Turbulence Models in Separated Flows

Validation and Analyses of QCR Correction Turbulence Model in Sub-/Super-sonic Inner Flows

Improved SST turbulence model for supersonic flows with APG/separation

Uncertainty Quantification of SSG/LRR-ω Turbulence Model Closure Coefficients

Application of the improved SST turbulence model for separated flow

Improved Prediction of Turbomachinery Flows Using Reynolds Stress Model with Helicity Modification and Modified 𝜸 Transition Model

Comparison of Three Turbulence Models in Supersonic High-Attack-angle Separated Flows

Numerical Investigation and Improvement Strategy of Flow Characteristics Inside Supersonic Separator

Study of 𝝎-Based Reynolds Stress Model with Two-Component Limit for Predicting Complex Flows

Modification of S-A Turbulence Model on Separation Flows

Numerical Investigation of Corner Separation Flow Using Spalart-Allmaras Model with Various Modifications

Improved Prediction of Turbomachinery Flows Using Reynolds Stress Model with Γ Transition Model

Prediction of Separation Induced Transition on Thick Airfoil Using Nonlinear URANS Based Turbulence Model

On the Correction of <Emphasis Type="Italic">k-ω</Emphasis> SST Turbulence Model to Three-Dimensional Shock Separated Flow

Comparative study on the performance of turbulence models in flow separation of large expansion ratio nozzle

Numerical study of separation flows with LES/RANS hybrid appoaches

Differential Reynolds Stress Model for Shock & Separated Flow

Assessment of turbulence models and mesh types for the simulation of multi-body separation by coupling the CFD and rigid body dynamics

Data-driven turbulence modeling in separated flows considering physical mechanism analysis

Performance of Turbulence Models for Transonic Flows in a Diffuser

Improved pressure-gradient sensor for the prediction of separation onset in RANS models