Abstract:The characteristics of the laser-induced plasma encountered in laser welding are investigated using a new three-dimensional modelling approach. A simplified keyhole model is employed to couple with our previous plasma plume model, and thus both the plasma inside a blind keyhole and the plasma plume issuing from the keyhole can be treated simultaneously. Investigations include the effects on the laser-induced plasma characteristics of many factors, including the velocity of metal vapour leaving from the keyhole bottom, the velocity of the shielding gas injected coaxially with the laser beam, the velocity and location of the assisting gas injected laterally with respect to the workpiece, and the energy absorption and radiation heat loss of the laser-induced plasma. Typical computed distributions of temperature, velocity and vapour concentration within the plasma are presented with the continuous-wave CO2 laser welding of iron workpiece as the calculation example. It is shown that the high-temperature core of the laser-induced plasma is mostly located inside the blind keyhole or near the keyhole top for the cases under study. The metal-vapour/shielding-gas momentum ratio plays an important role in determining the height of the plasma plume, and the plume height decreases with increasing shielding-gas velocity. The laterally injected assisting gas may also significantly affect the laser-induced plasma characteristics and thus can be used to control the unfavourable effect of the laser-induced plasma on the laser welding process. The predicted temperatures of the laser-induced plasma are reasonably consistent with corresponding experimental data.

Simulation of the Inverse Bremsstrahlung Absorption by Plasma Plume in Laser Penetration Welding

Three-Dimensional Transient Simulation of Laser Deep-penetration Welding Based on Combined Heat Source

Inverse Bremsstrahlung Absorption and the Evolution of Electron Distributions Accounting for Electron-Electron Collisions

Model Study on Laser Interaction with Near-Critical Density Plasma

Mechanism, Modeling, and Application of Plasma Current in Deep-Penetration Laser Welding

Prediction of the laser-induced plasma characteristics in laser welding: a new modelling approach including a simplified keyhole model

Three-dimensional Modelling of the Laser-Induced Plasma Plume Characteristics in Laser Welding

Study on the Effect of Laser-Induced Plasma Plume on Penetration in Fiber Laser Welding under Subatmospheric Pressure

Numerical Analysis of Hybrid Plasma in Fiber Laser-Arc Welding

Plasma Currents and Inverse Bremsstrahlung Absorption under Strong Dc/Ac Electric Fields

A study on laser keyhole welding in vacuum by computational fluid dynamics simulations with plume effect models

Simulation of Photoinduced Plasma Behavior in Laser Penetration Welding

3D Transient Multiphase Model for Keyhole, Vapor Plume, and Weld Pool Dynamics in Laser Welding Including the Ambient Pressure Effect

Effect of Focusing Condition on Laser Energy Absorption Characteristics in Pulsed Laser Welding

Evaluation of laser-induced plasma distribution

The Behavior and Its Control of Plasma Produced During Laser Welding

Influence of the spatial laser energy absorption on the molten pool dynamics in high-power laser beam welding

Effect of Ambient Pressure on Interaction Between Laser Radiation and Plasma Plume in Fiber Laser Welding

Parametric study of the laser energy absorption in high-power laser beam welding

Transport Phenomena and Keyhole Dynamics During Pulsed Laser Welding

Effect of side gas on laser induced plasma during laser deep penetration welding