Abstract:Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Ahead of Print. The dissemination of additive manufacturing methods has facilitated the design and production of complex structures which have a high strength-to-weight ratio. Cellular materials such as honeycombs have low-weight and high capacity to absorb energy which makes them desirable for the aerospace and automotive industries. The present work covers the study and comparison of metal-based regular honeycombs and functionally graded honeycombs. The latter encompass radial and linear/longitudinal gradients. Three repeating unit cells were studied: regular hexagons, Plateau and lotus. The structures were produced in aluminium using the laser powder bed fusion technique. Selected samples were submitted to a stress-relieving heat treatment. Numerical and experimental methods were used to assess the in-plane compressive properties. Finite element analysis was used to obtain the simulated force–displacement curves of each structure, allowing for the calculation of specific stiffness, absorbed energy and yield strength. The experimental method consisted of the compression of three specimens of three types of regular structures with and without stress-relieving heat treatment. The heat treatment reduced the yield strength and stiffness whilst increasing the ductility of the samples. The mechanical behaviour of the structures was found to depend upon a combined effect of the type of gradient, relative density, and unit cell structure. The results showed that an increase in the relative density would enhance the specific mechanical properties. The lotus configuration displayed the highest specific mechanical properties, as its geometry reduces the stress concentrations. The numerical results showed a reasonable match with the experimental results.

Energy Absorption Characteristics and Functional Gradient Optimization of a Hybrid Honeycomb

Multi-objective optimization and theoretical analysis of re-entrant structure with enhanced mechanical properties

Dynamic Response and Energy Absorption Characteristics of a Three-Dimensional Re-Entrant Honeycomb

Mechanical Properties of Re-Entrant Hybrid Honeycomb Structures for Morphing Wings

Graded honeycombs with high impact resistance through machine learning-based optimization

Modelling and characterization of novel honeycomb structures with mass gradient produced by additive manufacturing

Crashworthiness Analysis and Multi-Objective Optimization for Concave I-Shaped Honeycomb Structure

A novel gradient negative stiffness honeycomb for recoverable energy absorption

In-plane dynamic response and multi-objective optimization of negative Poisson's ratio (NPR) honeycomb structures with sinusoidal curve

Impact resistance of a double re-entrant negative poisson’s ratio honeycomb structure

Graded negative Poisson’s ratio honeycomb structure design and application

Graded Negative Poisson's Ratio Honeycomb Structure Design and Application

Energy Absorption Characteristics of a Novel Asymmetric and Rotatable Re-entrant Honeycomb Structure

Integrated lightweight gradient honeycomb metastructure with microwave absorption and mechanical properties: analysis, design, and verification

Investigation on the Energy Absorption Characteristics of Novel Graded Auxetic Re-Entrant Honeycombs

In-plane crushing response of a novel bidirectional re-entrant honeycomb with two plateau stress regions

Insight into the Negative Poisson’s Ratio Effect of the Gradient Auxetic Reentrant Honeycombs

Hierarchical nested honeycomb-based energy absorbers: design factors and tailorable mechanical properties

Modularizing honeycombs for enhancement of strength and energy absorption

Crashworthiness Design and Multiobjective Optimization for Hexagon Honeycomb Structure with Functionally Graded Thickness

Topology optimization of anisotropy hierarchical honeycomb acoustic metamaterials for extreme multi-broad band gaps