Abstract:Continuum manipulators have infinite degrees of freedom and high flexibility, making it challenging for accurate modeling and control. Some common modeling methods include mechanical modeling strategy, neural network strategy, constant curvature assumption, etc. However, the inverse kinematics of the mechanical modeling strategy is difficult to obtain while a strategy using neural networks may not converge in some applications. For algorithm implementation, the constant curvature assumption is used as the basis to design the controller. When the driving wire is tight, the linear controller under constant curvature assumption works well in manipulator position control. However, this assumption of linearity between the deformation angle and the driving input value breaks upon repeated use of the driving wires which get inevitably lengthened. This degrades the accuracy of the controller. In this work, the Koopman theory is used to identify the nonlinear model of the continuum manipulator. Under the linearized model, the control input is obtained through model predictive control (MPC). As the lifted function can affect the effectiveness of the Koopman operator-based MPC (K-MPC), a novel design method of the lifted function through the Legendre polynomial is proposed. To attain higher control efficiency and computational accuracy, we use a selective control scheme according to the state of the driving wires. When the driving wire is tight, the linear controller is employed; otherwise, the K-MPC is adopted. Finally, a set of static and dynamic experiments have been conducted using an experimental prototype. The results demonstrate high effectiveness and good performance of the selective control scheme.

Manipulability-Oriented Configuration Transition Control of Continuum Surgical Manipulators Based on Velocity Polytopes

Configuration Transition Control of a Continuum Surgical Manipulator for Improved Kinematic Performance

A Unified Approach for Second-Order Control of the Manipulator With Joint Physical Constraints

Kinematic Optimization of a Continuum Surgical Manipulator

Feedforward Neural Network Assisted Configuration Transition Control of Continuum Surgical Manipulators

Configuration Comparison among Kinematically Optimized Continuum Manipulators for Robotic Surgeries Through A Single Access Port

A Kind of Kinematics Modeling of 2 DOFs Notched Continuum Manipulator

Effective Manipulation in Confined Spaces of Highly Articulated Robotic Instruments for Single Access Surgery

Manipulability maximization in constrained inverse kinematics of surgical robots

Position Control of Continuum Manipulator with Twin-Pivot Compliant Joints

Robust Position Control of a Continuum Manipulator Based on Selective Approach and Koopman Operator

Manipulability Optimization Control of a Serial Redundant Robot for Robot-assisted Minimally Invasive Surgery

An Operating Stiffness Controller for the Medical Continuum Robot Based on Impedance Control

Dimension Reduced Instantaneous Inverse Kinematics for Configuration Variable Limits of Continuum Manipulators

Closed Loop Control of a Continuum Surgical Manipulator for Improved Absolute Positioning Accuracy.

Compliant Control Technology of Manipulator

Kinematics modeling and performance optimization of a kinematic-mechanics coupled continuum manipulator

A Multi-Contact-Aided Continuum Manipulator with Anisotropic Shapes

Hierarchical Task Impedance Control of a Serial Manipulator for Minimally Invasive Surgery

Design and Realization of Continuum Manipulator Based on Coupling of Double Parallel Mechanism

Dexterity enhancement of continuum robot for natural orifice transluminal endoscopic surgery in the dual-manipulator collaborative space