Abstract:Manufacturing CuCrZr alloy parts with high strength and high surface quality by selective laser melting (SLM) is a challenging task. This study investigates the microstructure, mechanical properties and machinability of SLM processed and heat-treated CuCrZr alloy through tensile test, compression test and ultra-precision machining. The microstructure analysis shows that the grain morphology and orientation are highly related to the laser track and building direction. Grain epitaxial growth is found on both horizontal (XY) and vertical (XZ) planes, which bends at the boundary of the molten track/pool. After heat treatment, molten track boundaries disappear and the slender and bent grains on the XY plane are replaced by polygonal square grains, but the large epitaxial grains on the XZ plane still remained. X-ray diffraction results indicate that the as-built sample contains α-Cu, Cr and CuxZry phases and building direction has an influence on the crystallographic orientation distribution. As-built (AB) CuCrZr alloy shows a comparable yield strength (218.0 MPa) with solution + ageing-treated (SAT) (231.3 MPa), which is much higher than that of the solution-treated (ST) counterpart (131.0 MPa). Although the ultimate tensile strength of the AB sample is lower than that of the SAT sample, its elongation at break (46.5%) is much higher than the latter (19.1%). The compressive strength of the AB sample is slightly lower than the SAT sample but higher than the ST sample. At low cutting speed, the ST sample shows a higher cutting force. High cutting speed will lead to the increase of cutting force of the AB and SAT samples but has a much lower effect on the ST sample. The XZ plane of the AB sample shows better machined surface quality. SAT sample has the highest material recovery during cutting and its chip will change from spiral to arc shape with the increase of cutting speed.

Microstructure Evaluation and Resultant Mechanical Properties of Laser- Arc Hybrid Additive Manufactured Cu-Cr-Zr Alloy

Laser–Direct Current arc Hybrid Additive Manufacturing of Cu-Cr-Zr Alloy: Microstructure Evaluation and Mechanical Properties

Formation mechanism of Al-Zn-Mg-Cu alloy fabricated by laser-arc hybrid additive manufacturing: Microstructure evaluation and mechanical properties

Surface Morphology, Microstructure and Mechanical Properties of Al–Mg–Sc Alloy Thin Wall Produced by Laser-Arc Hybrid Additive Manufacturing

Laser-arc Hybrid Additive Manufactured Al Cu Alloy for T-shaped Structure: Microstructure Evaluation and Molten Pool Behavior

Microstructure and mechanical properties of Cu-Cr-Zr alloy prepared by electron beam additive manufacturing and laser-MIG hybrid welding

Microstructure and Mechanical Properties of an Ultra-High Strength Steel Fabricated by Laser Hybrid Additive Manufacturing

Superior strength of laser-arc hybrid additive manufactured Al-Zn-Mg-Cu alloy enabled by a tunable microstructure

Microstructure Evolution and Mechanical Properties of Laser Additive Manufactured Ti–5Al–2Sn–2Zr–4Mo–4Cr Alloy

Comparative study of microstructure evaluation and mechanical properties of 4043 aluminum alloy fabricated by wire-based additive manufacturing

Microstructure evolution and mechanical properties of Al–Cu–Mn–Cd alloy fabricated by CMT-wire arc additive manufacturing

Macro/micro-structure and Mechanical Properties of Al-6Mg-0.3Sc Alloy Fabricated by Oscillating Laser-Arc Hybrid Additive Manufacturing

Wire arc additive manufacturing of Al-Zn-Mg-Cu alloy: Microstructures and mechanical properties

Effect of Weld Characteristic on Mechanical Strength of Laser-Arc Hybrid-Welded Al-Mg-Si-Mn Aluminum Alloy

Additively manufactured CuCrZr alloy: Microstructure, mechanical properties and machinability

Microstructure and Mechanical Properties of 2319 Aluminum Alloy Deposited by Laser and Cold Metal Transfer Hybrid Additive Manufacturing

Insightful Investigation for the Strengthening Mechanisms of Al-Cu Alloy Prepared by Wire Arc Additive Manufacturing

Microstructure Evolution of Wire-Arc Additively Manufactured 2319 Aluminum Alloy with Interlayer Hammering

Effect of heat treatment on the microstructure and properties of CuCrZr alloy manufactured by wire arc additive manufacturing

Microstructure evolution and mechanical properties of the wire plus arc additive manufacturing Al-Cu alloy

Al–Cu Alloy Fabricated by Novel Laser-Tungsten Inert Gas Hybrid Additive Manufacturing