Abstract:A key issue in designing and optimizing Stirling engines is to build a precise thermodynamic model to predict the output power, thermal efficiency, and detailed performance properties and provide useful information for further improvement. In this study, a thermodynamic model called Improved Simple Analytical Model (ISAM) was proposed, carefully considering heat and power losses in Stirling engines. A 100 W beta-type Stirling engine was built and tested with helium and nitrogen when pressure and rotary speed ranging from 1.6 MPa to 3 MPa and 260 r/min to 1380 rimin, respectively. Experimental information on performance, such as PV diagrams and temperatures of the heater and cooler, was much detailed. Increasing rotary speed brings a "thin" PV diagram because it made compression and expansion processes become more imperfect, indicating heat transfer enhancement was necessary for compression and expansion chamber in a high speed Stirling engine. Shaft power reached the maximum value of 30.1 W for helium and 21.0 W for nitrogen at rotary speeds of 1000 r/min and 650 r/min, respectively. Improving the mean pressure of gas increased the indicated power, cycle efficiency, shaft power, and electrical power. The maximum indicated power and cycle efficiency were 165 W and 16.5% for helium and 139 W and 12.2% for nitrogen in the same working conditions of 2.96 MPa and 1120 r/min. The ISAM agrees well with the experimental data with a deviation of 4.3-13.4% for helium and 1-7.1% for nitrogen. Analysis of energy losses with ISAM indicated that helium had larger shuttle and seal leakage losses and smaller flow resistance and regenerator heat transfer losses than nitrogen under the same working conditions. Flow resistance and regenerator heat transfer losses, which increased much more rapidly than seal leakage or shuttle heat losses with the increase in rotary speed and pressure, played an important role and resulted in different performances with the two working gases. This study provides comprehensive understanding of the influence mechanism of rotary speed, pressure and working gas in the view of heat/power losses for Stirling engine performance, and recommends that more work (e.g., mechanisms of heat and power losses and PV diagrams) should be performed to improve the precision of second-order models. (C) 2016 Elsevier Ltd. All rights reserved.

Performance Optimization of a Free Piston Stirling Engine Using Multi-Section Regenerators Based on the Response Surface Methodology

Optimizing design of a free piston Stirling engine using response surface methodology and grey relation analysis

Design Optimization with Computational Fluid Dynamic Analysis of Β-Type Stirling Engine

Working Mechanism and Characteristics of Gas Parcels in the Stirling Cycle

Numerical investigation on key parameters of a double-acting free piston Stirling generator

A Third-Order Numerical Model and Transient Characterization of a Β-Type Stirling Engine

An Approach to Combine the Second-Order and Third-Order Analysis Methods for Optimization of a Stirling Engine

Analysis and prediction of the performance of free- piston Stirling engine using response surface methodology and artificial neural network

Integrated Multi-model Optimization of Voice Coil Motor for High-Frequency Free-piston Stirling Generator

Multi-objective Optimization for GPU3 Stirling Engine by Combining Multi-Objective Algorithms

A new one-dimensional model of free-piston Stirling engine based on quasi-steady flow approximation and simi-implicit numerical method

Numerical study on regenerative effectiveness of parallel-plate regenerator for Stirling engine

Design and performance optimization of GPU-3 Stirling engines

Performance analysis and multi-objective optimization based on a modified irreversible Stirling cycle

Performance Prediction of New Engine System with Big and Small Air Cylinders and Big and Small Pistons

Improved Simple Analytical Model and Experimental Study of a 100W Β-Type Stirling Engine

Numerical study on a free-piston Stirling electric generator with a gas-spring-postpositioned displacer for high-power applications

Development of a Performance Analysis Model for Free-Piston Stirling Power Convertor in Space Nuclear Reactor Power Systems

Performance Analysis on Free-Piston Stirling Cryocooler Based on an Idealized Mathematical Model

Modeling of the dynamic characteristics and performance of a four‐cylinder double‐acting Stirling engine

Performance Prediction and Optimization of Single-Piston Free Piston Expander-Linear Generator Based on Machine Learning and Genetic Algorithm