Abstract:As a detonation wave propagates from a confined tube to an unconfined space, it undergoes di↵raction, which is characterized by a change of geometry from a quasi-planar wave to a cylindrical or spherical wave [1–4]. Depending on the mixture composition, thermodynamic conditions, detonation velocity at the tube exit, the geometry of the area expansion and tube cross section, the detonation wave can be either extinguished (sub-critical regime) or re-initiated (super-critical regime) [2]. Detonation di↵raction has been extensively studied both experimentally and through numerical simulations. Since Zeldovich et al.’s pioneering work [5], numerous studies have been performed on detonation di↵raction using a variety of experimental geometry and techniques, as summarized by Schultz [4] in 2000. Since then, a number of investigations have been performed, for example by Khasainov et al. [6], Meredith et al. [7], and Nagura et al. [8]. The most advanced experimental investigation is the study of Pintgen [1, 2] who performed simultaneous imaging of the shock front and reaction zone, using schlieren and Planar Laser Induced Fluorescence (PLIF), as well as multi-exposure and stereoscopic chemiluminescence imaging. Jones et al. [10–13] and Oran et al. [14, 15] used numerical simulations to study the di↵raction of detonation and reignition process at an abrupt tube diameter increase (180 angle). Layered and uniform H2-O2(-Ar) mixtures were modeled. The chemical schemes were either 1-step or 2-step models. Arienti et al. [9] and Nagura et al. [8] performed simulations of detonation di↵raction from a tube to an unconfined volume (90 angle). Arienti used a 1-step reaction model characterized by di↵erent activation energies whereas Nagura employed a 2-step scheme to model a stoichiometric H2-air mixture. Khasainov et al. [6] studied the di↵raction of detonation from a tube to a cone. A stoichiometric C2H2-O2 mixture was considered using a 1-step pressure dependent reaction model. Deiterding [16] studied the failure and reignition of di↵racting detonations in a stoichiometric H2-O2 mixture diluted with 70% argon. High-resolution numerical simulations with mesh refinement were performed using Euler equations. The reactivity of the mixture was described using a detailed reaction model composed of 34 irreversible reactions and 9 species. From this literature review, we see that most numerical studies have been performed using an inviscid gas model (Euler equations) and global (1or 2-step) kinetic schemes. The present study aims at performing numerical simulation of detonation di↵raction using a viscous gas model (Navier-Stokes equations) and accurate chemical and thermodynamic models to allow for a more realistic comparison with the experimental data of Pintgen in terms of di↵racting detonation behaviour and structure.

Modeling of Spontaneous Raman Scattering for Detonation Wave Imaging

Modeling of Rayleigh Scattering Imaging of Detonation Waves: Quantum Computation of Rayleigh Cross-Sections and Real Diagnostic Effects

Assessing an Experimental Approach for Chemical Explosive Mode and Heat Release Rate Using DNS Data

Application of a Laser Induced Fluorescence Model to the Numerical Simulation of Detonation Waves

Application of a Laser Induced Fluorescence Model to the Numerical Simulation of Detonation Waves in Hydrogen–oxygen–diluent Mixtures

In-situ temperature and major species measurements of sooting flames based on short-gated spontaneous Raman scattering

High-frequency measurement of concentration in an isothermal methane-air gas mixture using spontaneous Raman spectroscopy

Characterization of Turbulent hytVAir Jet Diffusion Flames by Single-Pulse Spontaneous Raman Scattering

Chemiluminescence imaging of an optically accessible non-premixed rotating detonation engine

Numerical Investigation of Spontaneous Formation of Multiple Detonation Wave Fronts in Rotating Detonation Engine

Near-MHz temperature and H2O measurements in post-detonation fireballs of 25 g hemispherical explosives using scanned-wavelength-modulation spectroscopy

Shock Wave and Flame Front Induced Detonation in a Rapid Compression Machine

Raman spectroscopy for quantitative measurements of temperature and major species in high-pressure non-premixed NH3/H2/N2 counterflow flames

Numerical Study of Detonation Wave Di ↵ raction in Hydrogen-based Mixtures

Numerical investigation of detonation initiation in a modeled rotating detonation engine

Ray-tracking Methods for Characterizing the Dynamics of Curved Detonation

Temperature Measurement Utilizing the Vibrational CARS Signal from the Ground Level X2Σg+ of N2+ in High-Temperature Flames

Single-Shot Single-Beam Coherent Raman Scattering Thermometry Based on Air Lasing

High Resolution Nonlinear Raman Spectroscopy: Fundamental Aspects of Line Shapes for Combustion Environments

A microscopic study of one-dimensional H2-O2 detonation using DSMC method

Temperature dependence of Coherent versus spontaneous Raman Scattering