Abstract:A noise with multiple tonal components is prevalent in practice, and these tones, contributing to noise annoyance, may even span several octaves and the frequencies of them always vary with working condition. Conventional broadband noise control structures with limited spaces are hard to address multiple-tonal noise due to sum rules in acoustics. Resonator arrays is feasible but their dependency on the geometrical and mechanical parameters challenges matching variable frequencies of tonal components. This work introduces a Shunt-Electromechanical Diaphragm (SEMD) to construct sound absorption and transmission spectra with multiple peaks, thereby creating an acoustic comb filter in deep-sub-wavelength scale to address multiple-tonal noise. The SEMD consists of a moving-coil loudspeaker integrated with a circuit housing multiple resonance branches, whose acoustic impedance is determined by circuit parameters. This allows the frequencies and number of sound absorption and transmission peaks to be arbitrarily reconfigured by adjusting circuit parameters. A comprehensive lumped parameter model is devised to elaborate on the electromechanical coupling of the SEMD and predicts its comb filter effect. Experiments in an impedance tube show that comb spectra with three peaks for sound absorption and transmission are successfully constructed and reconfigured by collocating circuit parameters, verifying the theoretical model. The three peaks of the sound absorption spectrum have values above 0.9 and are electrically tunable over more than three octaves. The method in this work blends electromechanical dynamics with specialized analog circuits for efficient tonal noise reduction across a broad bandwidth, which removes the geometrical and mechanical constrains and paves the way for digital reconfigurable acoustic devices. Moreover, the multiple peaks matching between noise source and sound absorption/transmission spectra via the electromechanical coupling mechanism of the SEMD bypasses the sum rules in acoustics, providing an alternative method for controlling noise over a much broader bandwidth.

Continuous and Rapid Sound Regulation Via a Compact Linear Electroacoustic Field Effect Transistor

INTRACOCHLEAR ELECTRIC AND ACOUSTIC STIMULATOR PROTOTYPE: AN IMPLANTABLE SOLUTION TO THE HYBRID COCHLEAR IMPLANT

Electroacoustic Analysis of an Electret Loudspeaker Using Combined Finite-Element and Lumped-Parameter Models.

Flexible structured high-frequency film bulk acoustic resonator for flexible wireless electronics

Nonlinear Pendulum Metamaterial to Realize an Ultra-Low-frequency Field Effect Bandgap

A Modeling and Feasibility Study of a Micro-Machined Microphone Based on a Field-Effect Transistor and an Electret for a Low-Frequency Microphone

Recent Advances in Acoustoelectric Conversion of Piezoelectric Electrospun Nanofibers

An elastic piezoelectric nanomembrane with double noise reduction for high-quality bandpass acoustics

Mechanical Modulation of 2D Electronic Devices at Atto‐Joule Energy via Flexotronic Effect

Acoustoelectric Conversion and Deep-Subwavelength Acoustic Focusing Based on Fresnel Zone Plates

Experimental demonstration of an electroacoustic transistor

Impact-activated Programming of Electro-Mechanical Resonators Through Ferroelectret Nanogenerator (FENG) and Vanadium Dioxide

Study of an acoustic energy harvester consisting of electro-spun polyvinylidene difluoride nanofibers

An acoustic comb filter by shunted electromechanical diaphragm

Micromachined Piezoelectric Acoustic Device

Electrical-Modulated Flexible Acoustic Metamaterial: Enhancing Low-Frequency Absorption via an Ionic Electroactive Polymer

A high-resolution electric field sensor based on piezoelectric bimorph composite

Piezoelectric–Piezoresistive Coupling MEMS Sensors for Measurement of Electric Fields of Broad Bandwidth and Large Dynamic Range

Ultra‐Broadband Flexible Thin‐Film Sensor for Sound Monitoring and Ultrasonic Diagnosis

Two-stage amplification of an ultrasensitive MXene-based intelligent artificial eardrum

Evolvable Acoustic Field Generated by a Transducer with 3D-Printed Fresnel Lens