Abstract:The zero-sequence loop inherently exists in the structure of the three-phase open-end winding permanent-magnet synchronous machine (OW-PMSM) system with common dc bus, which provides the circulating path for zero-sequence current (ZSC) and consequently causes the torque ripple and extra system loss. Besides, the common-mode voltage (CMV), which can cause many negative effects, such as the bearing current and the failure of motor bearing, is another concern in the driving system. However, the simultaneous suppression of ZSC and the CMV control of the devices is investigated mainly in the application of the induction machine system and the multiphase OW-PMSM system, whereas it is ignored in the application of the three-phase OW-PMSM system, in which the suppression of ZSC is more complex considering the effect of flux linkage harmonic components. On this basis, this article proposes a strategy that can not only suppress the ZSC, but also eliminate the ripple of CMV in the three-phase OW-PMSM system. In the proposed method, the suppression of ZSC is achieved by synchronously adjusting the duration time of each phase within every control cycle based on the reference voltage of zero-sequence control loop, which can simplify the conventional rearrangement-based scheme. Furthermore, the duration time of each phase is distributed into each switch device of the two inverters, with the principle of eliminating the ripple of CMV. Consequently, both the suppression of ZSC and the CMV control can be achieved easily. Furthermore, the influence of dead time on the CMV control is analyzed, indicating that the CMV control is irrelevant with the dead time. Moreover, the effective modulation range of the proposed technique is analyzed. Finally, the experimental validation is conducted on a three-phase OW-PMSM system with common dc bus.

Finite Control Set Method for Open-end Winding PMSM with Common-mode Voltage Suppression

Comparative Study of Flux-Weakening Control Methods for Pmsm Drive over Wide Speed Range

FEA-Based Mathematical Modeling and Simulation for IPMSM Drive with Consideration of Saturation and Cross-Coupling Influence

A Fault Tolerant Control Strategy for Dual Three-Phase PMSM under Single-Phase Open Circuit Fault Considering Inductance Asymmetry

A Sensorless Drive Strategy for Open-End Winding PMSM with Common DC Voltage Based on Lower Switching Frequency

Control Strategy for Open Winding PMSM System Supplied by the Z-source and Voltage Source Integrated Converters

Torque Ripple Suppression Method with Reduced Switching Frequency for Open-Winding PMSM Drives with Common DC Bus.

Robust Model Predictive Current Control for a Nine-Phase Open-End Winding PMSM With High Computational Efficiency

Model Predictive Control with Duty Ratio Modulation for Open-Winding PMSM Driveswith Common DC Bus

Virtual Voltage Vector Based Model Predictive Control for a Nine-Phase Open-End Winding PMSM With a Common DC Bus

Zero Sequence Current Suppression Strategy for Open Winding PMSG Fed by Semi-controlled Converter

An I/f Control Method With Closed-loop Regulation of Current Vector for Surface Permanent Magnet Synchronous Motor Drives

An Improved Power Balancing Control Scheme for Open‐winding Permanent Magnet Synchronous Machine Based on Redistribution of Reference Voltages

Fault-tolerant Control Strategy with Reduced Switching Frequency for Inverter-Based Fault in Open-Winding PMSM System

Open Winding PMSM System for Electric Vehicles Collaboratively Supplied by the Z-Source and Voltage Source Converters

Model Predictive Current Control for an Open-Winding PMSM System with a Common DC Bus in 3-D Space

Comparative Study of Field-Oriented Control in Different Coordinate Systems for DTP-PMSM

Simplified Modulation Scheme for Open-End Winding PMSM System with Common DC Bus under Open-Phase Fault Based on Circulating Current Suppression

Common Mode Current Suppression for Permanent Magnet Synchronous Motor Based on Model Predictive Control

Zero-Sequence Current Suppression Strategy with Common-Mode Voltage Control for Open-End Winding PMSM Drives with Common DC Bus

Hybrid Vector Model Predictive Control for Open-winding PMSM Drives