Abstract:Thermal and mechanical properties of SCF@SAs@SLC‐SiO2/EP composites. The demand for epoxy (EP) in semiconductor, aerospace, and other applications is currently on the rise. However, pure epoxy is difficult to meet these requirements, such as low thermal conductivity and poor toughness. Therefore, in this paper, sulfonamides (SAs) and core‐shell silica (SLC‐SiO2) were grafted onto the surface of short carbon fibers (SCF) with sizes of 0.1–6 mm by the chemical grafting method. As a result, the surface activity of SCF was improved and the interfacial properties of the EP composites were enhanced. The interfacial compatibility of SCF grafted with SAs and SLC‐SiO2 in EP is greatly improved, resulting in stronger mechanical interlocking and chemical bonding ability between EP and SCF. The results showed that when the content of SCF@SAs@SLC‐SiO2/EP composites reached 0.3 wt% of SCF@SAs@SLC‐SiO2, the impact and tensile strengths were increased from 12.15 kJ·m−2 and 43.4 MPa to 16.93 kJ·m−2 and 74.97 MPa compared with the pure epoxy, which were improved 39.3% and 72.7%. In addition, the thermal conductivity of SCF@SAs@SLC‐SiO2/EP composites was also improved by 12.5% from 0.205 W·(m·K)−1 to 0.2306 W·(m·K)−1 compared with the pure EP. This is due to improved chemical interactions and mechanical interlocking at the fiber‐epoxy interface. This study provides a new method for the preparation of high‐performance SCF/EP composites. Highlights The amino group of sulfonamides was grafted with short carbon fiber to increase the surface active group of short carbon fiber. Sulfonamides react with carboxyl groups on the surface of core‐shell silica to form an "organic–inorganic" structure. Improve the surface roughness of short carbon fiber, and make it evenly dispersed in epoxy resin, so as to improve the performance of epoxy composite materials.

The Effects of Chemical Grafting 1,6-Hexanediol Diglycidyl Ether on the Interfacial Adhesion Between Continuous Basalt Fibers and Epoxy Resin As Well As the Tensile Strength of Composites

Roles of Different Organic-Inorganic Hybrid Interfaces in Enhancing the Mechanical Properties of Continuous Basalt Fiber/epoxy Composites

Enhancing the interfacial adhesion between continuous basalt fibers and epoxy resin by depositing silicon dioxide nanonparticles

Enhanced interfacial properties of hierarchical MXene/CF composites via low content electrophoretic deposition

Grafting Low Contents of Branched Polyethylenimine onto Carbon Fibers to Effectively Improve Their Interfacial Shear Strength with an Epoxy Matrix

Interfacial Enhancement by CNTs Grafting towards High-Performance Mechanical Properties of Carbon Fiber-Reinforced Epoxy Composites

Enhanced interfacial interaction, mechanical properties and thermal stability of basalt fiber/epoxy composites with multi-scale reinforcements

Improving the Interfacial and Flexural Properties of Carbon Fiber–epoxy Composites Via the Grafting of a Hyperbranched Aromatic Polyamide Onto a Carbon Fiber Surface on the Basis of Solution Polymerization

Strengthening and Modulating Interphases in Carbon Fiber/Epoxy Composites by Grafting Dendritic Polyetheramine with Different Molecular Weights Onto Carbon Fiber

Grafting hyperbranched polymer with terminal hydroxyl groups onto carbon fiber surface in two-step polycondensation for improving the interfacial properties of carbon fiber/epoxy resin composite

Enhancing Interfacial Strength of Epoxy Resin Composites Via Evolving Hyperbranched Amino-Terminated POSS on Carbon Fiber Surface

Hierarchical Interfacial Construction by Grafting Cellulose Nanocrystals onto Carbon Fiber for Improving the Mechanical Performance of Epoxy Composites

Surface Modification Of Bamboo Fibers To Enhance The Interfacial Adhesion Of Epoxy Resin-Based Composites Prepared By Resin Transfer Molding

Synergy of electrochemical grafting and crosslinkable crystalline sizing agent to enhance the interfacial strength of carbon fiber/PEEK composites

Highly advanced phthalonitrile composites from epoxy‐ended hyperbranched poly(trimellitic anhydride ethylene glycol) ester grafted basalt fibers

Effect of Short Carbon Fibers and Carbon Nanotubes Dispersed by Utilizing Hollow Glass Beads As Carriers on the Tensile and Curing Properties of Epoxy Resin

Effects of Bonding Types of Carbon Fibers with Branched Polyethyleneimine on the Interfacial Microstructure and Mechanical Properties of Carbon Fiber/epoxy Resin Composites

Constructing a Superior Interfacial Microstructure on Carbon Fiber for High Interfacial and Mechanical Properties of Epoxy Composites

Construction of "organic–inorganic" hierarchical structure of carbon fibers and the effect on the properties of epoxy composites

Interfacial Properties And Impact Toughness Of Dendritic Hexamethylenetetramine Functionalized Carbon Fiber With Varying Chain Lengths

Constructing hierarchically structured interphases for strong and tough epoxy nanocomposites by amine-rich graphene surfaces