Abstract:When the concentration of a gas is below its lower flammable limit and the content of a liquid is below its minimum explosible concentration, their combined fuel mixture can be ignitable. The flammability characteristics and inhibition strategies for battery emission mixtures deserve further in-depth research attention. This article presents experimental research on the ignition characteristics and inhibition strategy for a venting emission mixture of a failure LiFePO4 battery. By identifying the components of venting emissions, ignition experiments for gases, electrolyte mist, their combination fuels, and mixtures with additives are performed to determine the flammable parameters, including ignition sensitivity and severity. The hybrid combination of non-flammable venting gases and electrolyte mist has the potential to induce ignition. However, there still exists a non-ignition region, where the gas concentration ratio (mg) is below 0.15 and the liquid concentration ratio (ml) is below 0.1. A safety design principle can be proposed: increasing ignition temperature, prolonging ignition time, and reducing maximum pressure. Adhering to this principle, a non-flammable electrolyte consisting of 1 mol LiPF6 in EC:DEC = 1:1 vol%, with FEC at 10% and VC at 1%, can be considered as an optimization strategy. In comparison to the original gas–liquid mixtures, the region where no ignition occurs becomes wider when both the mg is below 0.45 and the ml is below 0.3. The new two-phase mixture has an ignition temperature of 835 °C, which is, respectively, 50% higher than that of the original mixture. Overall, this experimental research demonstrates an innovative methodology for assessing the battery venting emission mixture safety while proposing a design principle for modifying non-flammable electrolyte functional materials. Consequently, these findings can contribute to formulating more suitable preventive and protective measures for commercial electric vehicles and battery energy storage systems’ thermal safety designs.

Foreign Matter Defect Battery and Sudden Spontaneous Combustion

Lithium-ion battery sudden death: Safety degradation and failure mechanism

A Detailed Finite Element Model of Internal Short Circuit and Venting During Thermal Runaway in a 32650 Lithium-Ion Battery

Battery safety: Fault diagnosis from laboratory to real world

Analysis of Potential Causes of Safety Failure of New Energy Vehicle Power Batteries

Towards a safer lithium-ion batteries: A critical review on cause, characteristics, warning and disposal strategy for thermal runaway

Detecting the foreign matter defect in lithium-ion batteries based on battery pilot manufacturing line data analyses

Experimental Research on the Ignition Characteristics and Inhibition Strategy for Venting Emissions Mixture of Failure LiFePO4 Battery

Experimental research on flammability characteristics and ignition conditions of hybrid mixture emissions venting from a large format thermal failure lithium-ion battery

Series Arc-Induced Internal Short Circuit Leading to Thermal Runaway in Lithium-Ion Battery

An Analysis of Li-Ion Induced Potential Incidents in Battery Electrical Energy Storage System by Use of Computational Fluid Dynamics Modeling and Simulations: the Beijing April 2021 Case Study

Detection Technology for Battery Safety in Electric Vehicles: A Review

A comprehensive insight into the thermal runaway issues in the view of lithium-ion battery intrinsic safety performance and venting gas explosion hazards

Tracing Root Causes of Electric Vehicle Fires

Fire and explosion characteristics of vent gas from lithium-ion batteries after thermal runaway: A comparative study

Thermal Runaway Prognosis of Battery Systems Using the Modified Multiscale Entropy in Real-World Electric Vehicles

Understanding the Non-Collision Related Battery Safety Risks in Electric Vehicles a Case Study in Electric Vehicle Recalls and the LG Chem Battery

Fault Prognosis and Isolation of Lithium-ion Batteries in Electric Vehicles Considering Real-Scenario Thermal Runaway Risks

Intrinsic Safety Risk Control and Early Warning Methods for Lithium-Ion Power Batteries

Comprehensively analysis the failure evolution and safety evaluation of automotive lithium ion battery

Revealing the Mechanism of Pack Ceiling Failure Induced by Thermal Runaway in NCM Batteries: A Coupled Multiphase Fluid-Structure-Interaction Model for Electric Vehicles