Abstract:In this paper, a Finite-Element (FE) numerical investigation on timber-to-timber joints and composite beams with inclined self-tapping screws (STSs) is presented. Based on past experimental data and numerical literature efforts, full 3D solid FE models of selected geometrical and mechanical configurations of technical interest are implemented in ABAQUS software package and analysed under static loading conditions. The typical push-out samples include GL24h timber members with several types (WT-T-8.2, 190 mm and 220 mm their length), layouts (2 + 2, 4 + 4, 2 + 2 X-shaped) and inclination of screws (up to ±45°). For the full-scale beam samples in bending (8 m their span), composite systems consisting of GL24h timber beam, wooden plank, spruce floorboards and STSs are investigated. There, the STS joints take the form of two-rows or X-shaped connections, respectively (45° or 90° their inclination), including four screw types and different spacing. In both the push-out and full-scale cases, simple modelling approaches are taken from the ABAQUS library and adapted to the timber-to-timber structural system under investigation, so as to explore their structural performance in the elastic and post-damage phases, up to failure. A key role in the typical FE models is assigned to input material properties and mechanical contacts, including damage constitutive laws so as to reproduce possible local failure phenomena in the timber or steel components, as well as cohesive damage interactions for the joints. The presented FE models are calibrated in accordance with past research studies, and validated – for the examined structural typology – against experimental results available in literature. Comparative calculations are hence presented, based on the collected numerical, experimental and analytical estimations for the selected samples. As shown, the examined modelling approach can reasonably capture the expected performance of timber-to-timber joints and composite systems.

Experimental and Numerical Studies on the Traditional Penetration Mortise–Tenon Connection Reinforced by Self-Tapping Screws

Demand on Stiffeners in Stiffened Extended End-Plate Connections

Experimental Study and Numerical Simulation Analysis on Reinforcement of Mortise-Tenon Joints with Flat Steel Strips

Strengthening of Composite T-joints Using Ø 0.11 Mm Z-pins Via an Ultrasound-Guided Insertion Process

Mechanical properties of glulam moment-resisting joints reinforced by inclined self-tapping screws

Study on geometric optimization for new type of steel mortise and tenon joint based on performance

Experimental Study on the Traditional Timber Mortise-Tenon Joints

Numerical analysis of timber-to-timber joints and composite beams with inclined self-tapping screws

Experimental and finite element analysis of flexural performance of steel-timber composite beams connected by hybrid-anchored screws

Numerical and Optimal Study on Bending Moment Capacity and Stiffness of Mortise-and-Tenon Joint for Wood Products

Experimental Study on Wooden Pin Reinforcement of the Typical Mortise-Tenon Joints of Ancient Timber Frames

Experimental study on seismic performance of Chinese traditional mortise and tenon joints with different lengths that tenons pull out of mortise

Experimental Study on Tenon and Mortise Joints of Wood-Structure Houses Reinforced by Innovative Metal Dampers

Investigation of the Tensile Properties of High-Strength Bolted Joints in Static Drill Rooted Nodular Piles

Study on the strength mechanism of the wooden round-end mortise-and-tenon joint using the digital image correlation method

Test Studies on Wooden Double-tapping Screw Pullout Coordination

Finite Element Modeling on Shear Performance of Grouted Stud Connectors for Steel-Timber Composite Beams

Research on flexural performance of glulam spliced joints connected by self-tapping screws in different arrangements

Ultimate tensile behavior of bolted stiffened T-stub connections in progressive collapse resistance

Improved design of self-tapping screw (STS) for Korean larch and red pine cross laminated timber (CLT)

Study on the seismic performance of through-tenon joints with pullout tenon gaps between mortise and tenon shoulder