Abstract:Functionalized aluminosilicate materials were studied as catalysts for the conversion of different cyclic carbonates to the corresponding epoxides by the addition of CO2. Aluminum was incorporated in the mesostructured SBA-15 silica network. Thereafter, functionalization with imidazolium chloride or magnesium oxide was performed on the Al_SBA-15 supports. The isomorphic substitution of Si with Al and the resulting acidity of the supports were investigated via 27Al magic angle spinning (MAS) nuclear magnetic resonance (NMR) spectroscopy and NH3 adsorption microcalorimetry. The Al content and the amount of MgO were quantified via inductively coupled plasma optical emission spectroscopy (ICP-OES) analysis. The anchoring of the imidazolium salt was assessed by 29Si and 13C MAS NMR spectroscopy and quantified by combustion chemical analysis. Textural and structural properties of supports and catalysts were studied by N2 physisorption and X-ray diffraction (XRD). The functionalized systems were then tested as catalysts for the conversion of CO2 and epoxides to cyclic carbonates in a batch reactor at 100 or 125 °C, with an initial CO2 pressure (at room temperature) of 25 bar. Whereas the activity of the MgO/xAl_SBA-15 systems was moderate for the conversion of glycidol to the corresponding cyclic carbonate, the Al_SBA-15-supported imidazolium chloride catalysts gave excellent results over different epoxides (conversion of glycidol, epichlorohydrin, and styrene oxide up to 89%, 78%, and 18%, respectively). Reusability tests were also performed. Even when some deactivation from one run to the other was observed, a comparison with the literature showed the Al-containing imidazolium systems to be promising catalysts. The fully heterogeneous nature of the present catalysts, where the inorganic support on which the imidazolium species are immobilized also contains the Lewis acid sites, gives them a further advantage with respect to most of the catalytic systems reported in the literature so far.

Straightforward Construction of Amino-Functionalized ILs@SBA-15 Catalysts Via Mechanochemical Grafting for One-Pot Synthesis of Cyclic Carbonates from Aromatic Olefins and CO2

Crosslinked Resin-Supported Bifunctional Organocatalyst for Conversion of CO2 into Cyclic Carbonates.

Robust Mg(Ca)Zr-Doped Acid-Base Bifunctional Mesoporous Silica and Their Applications in the Deacetalization-Knoevenagel Reaction.

One-pot Synthesis of Cyclic Carbonates from Olefins and CO2 Catalyzed by Silica-Supported Imidazolium Hydrogen Carbonate Ionic Liquids

Mechanochemical Construction of Mesoporous Silicon-Supported Organocatalysts with Alkylol-Amine Cooperative Sites for CO2 Fixation into Cyclic Carbonates under Halogen-Free Conditions

Synthesis of a novel multi-SO 3 H functionalized strong Brønsted acidic ionic liquid and its catalytic activities for acetalization

Efficient heterogeneous functionalized polymer ionic liquid catalyst for the synthesis of ethylene carbonate via the coupling of carbon dioxide with ethylene oxide

An organic polymer-grafted ionic liquid as a catalyst for the cycloaddition of CO2 to epoxides

Synthesis of a Novel Strong Brønsted Acidic Ionic Liquid and its Catalytic Activities for the Oxathioacetalization

Construction of polymers with highly dispersed reactive phases and open pores for catalyzing the efficient synthesis of CO2 to α‐methylene cyclic carbonates

Cocatalyst-Free Hybrid Ionic Liquid (IL)-Based Porous Materials for Efficient Synthesis of Cyclic Carbonates through a Cooperative Activation Pathway

Bottom-up fabrication of DABCO-based bicationic ionic liquid-grafted MIL-101(Cr): Facilitating simultaneous activation of CO 2 and epoxides for cyclic carbonate synthesis

Sterically regulated halogen‐free bifunctional ionic liquids for catalytic conversion of CO2 into cyclic carbonates

Immobilization poly(ionic liquid)s into hierarchical porous covalent organic frameworks as heterogeneous catalyst for cycloaddition of CO2 with epoxides

Metal-free Catalysis for the One-Pot Synthesis of Organic Carbamates from Amines, CO2, and Alcohol at Mild Conditions

Aluminosilicate-Supported Catalysts for the Synthesis of Cyclic Carbonates by Reaction of CO2 with the Corresponding Epoxides

Facile Construction of Carboxyl-Functionalized Ionic Polymer towards Synergistic Catalytic Cycloaddition of Carbon Dioxide into Cyclic Carbonates

Basic-functionalized Ionic Porous Organic Polymers: Triple Roles in One for Highly Efficient and Recyclable Carboxylative Cyclization of CO2 under Mild Conditions.

Design of composite based on UiO-66 and ionic liquid for the CO 2 conversion into cyclocarbonate

Boosting catalytic performance for CO 2 cycloaddition under mild condition via amine grafting on MIL-101-SO 3 H catalyst

Novel and sustainable carboxylation of terminal alkynes and CO2 to alkynyl carboxylic acids using triazolium ionic liquid-modified PMO-supported transition metal acetylacetonate as effective cooperative catalysts