Abstract:Microcrystalline cellulose is used to prepare aminated cellulose aerogels. They exhibit a high CO2 uptake of 1.5 and 1.3 mmol g−1 at 0 and 25 °C at 1 bar, respectively, and of 0.29 mmol g−1 at 25 °C at ambient CO2 pressure of 0.4 mbar. It implies its potential use for both traditional point‐source capture and direct air capture. Given the substantial emissions of CO2 into the atmosphere, there is a critical need for effective CO2 adsorbents at scale, ideally derived from abundant and sustainable natural resources. In this work, microcrystalline cellulose derived from cotton is used to fabricate cellulose aerogel as porous support via a NaOH/urea‐based dissolution and regeneration process, followed by surface modification with a series of amino silane coupling agents to produce aminated cellulose aerogel as CO2 adsorbent. The as‐synthesized optimal adsorbent exhibits a high CO2 sorption capacity of up to 1.5 and 1.3 mmol g−1 at 0 °C and 25 °C at 1 bar, respectively. Notably, in‐depth analysis shows that the adsorbent achieves an impressive capacity of CO2 uptake of 0.29 mmol g−1 at 25 °C at an exceptionally low CO2 pressure of 0.4 mbar, i.e., under ambient CO2 pressure. It implies its potential use as adsorbent both for the traditional point‐source capture and the direct air capture as an emerging negative emission technology. This study underscores the environmentally friendly, cost‐effective, and biosourced attributes of aminated cellulose aerogel as a compelling alternative for carbon capture, contributing to global initiatives combating CO2 emissions and stressing the key role of sustainable materials in tackling this global environmental challenge.

Comparison of Characteristics of the Cellulose Nanocrystal Aerogels Aminosilane-Functionalized Through Gas-Phase Reaction

The Aminosilane Functionalization of Cellulose Nanocrystal Aerogel Via Vapor‐phase Reaction and Its CO2 Adsorption Characteristics

Aminosilane-grafted spherical cellulose nanocrystal aerogel with high CO2 adsorption capacity

The aminosilane functionalization of cellulose nanofibrils and the mechanical and the CO2 adsorption characteristics of their aerogel

Ultralight, Elastic, Magnetic and Superhydrophobic Cellulose Nanofibril Based Aerogel with Layer-Support Structure Designed for Both Excellent Oil-Water Separation and Efficient PM2.5 Removal

Aerogel nanoarchitectonics based on cellulose nanocrystals and nanofibers from eucalyptus pulp: preparation and comparative study

Cellulose-Silica Composite Aerogels Prepared with Sodium Silicate by Freeze Drying Method

Amino-modified biochar-silica hybrid aerogels with ordered pore structure templated by cellulose nanocrystals for highly efficient and selective CO 2 capture

Preparation and Comparative Study of Aerogels Based on Cellulose Nanocrystals and Nanofibers from Eucalyptus Pulp

Chemically Cross-Linked Cellulose Nanocrystal Aerogels with Shape Recovery and Superabsorbent Properties

Cellulose nanofiber aerogels: effect of the composition and the drying method

Comparative Study of Aerogels Obtained from Differently Prepared Nanocellulose Fibers.

Aminated Microcrystalline Cellulose Aerogel for Efficient CO2 Capture

Multiscale Nanocelluloses Hybrid Aerogels for Thermal Insulation: the Study on Mechanical and Thermal Properties.

Preparation and Properties of Novel Superhydrophobic Cellulose Nanofiber Aerogels

Cellulose Aerogels from Aqueous Alkali Hydroxide–Urea Solution

Facile synthesis of polyethyleneimine-modified cellulose nanocrystal/silica hybrid aerogel for CO2 adsorption

Cellulose Aerogels Prepared from Cellulose/amimcl Solutions

Multiscale Assembly of Superinsulating Silica Aerogels Within Silylated Nanocellulosic Scaffolds: Improved Mechanical Properties Promoted by Nanoscale Chemical Compatibilization

Cellulose Nanofibril (CNF) Based Aerogels Prepared by a Facile Process and the Investigation of Thermal Insulation Performance

Research in porous structure of cellulose aerogel made from cellulose nanofibrils