Abstract:Multi-level dual-active-bridge (DAB) DC-DC converters offer higher voltage-blocking capability and larger stepup ratios, as well as increased number of degrees of freedom (DoFs) compared to the traditional two-level DAB converter. Thus, it has potential to be used in medium-voltage DC (MVDC) systems. However, the control complexity of the multi-level DAB converters also increases along with the number of DoFs. When soft-switching is considered as an optimization objective together with other performance indices (e.g., peak or root-mean-square values of the inductor current), the analytical solutions will be difficult to derive due to the increased number of control variables and complicated soft-switching constraints. To address this issue and improve the efficiency of the DAB converter, this paper proposes a control strategy for a multi-level DAB converter to achieve both soft-switching and minimum current stress simultaneously. The analytical solutions are calculated by improved Karush-Kuhn-Tucker (KKT) conditions, where the numerical solutions are used to locate the operating modes and determine the zero-voltage-switching (ZVS) boundaries. This can simplify the Lagrangian function and inequality constraints, and then, the analytical solutions can be obtained by the simplified KKT conditions. In addition, a comprehensive comparison between the quasi-ZVS and strict-ZVS control is carried out, so that the converter efficiency, implementation complexity, and smooth transition between different power levels can be compromised for practical applications. Finally, the performances of the proposed control strategy in terms of current stress minimization and softswitching operation are validated by experimental tests.

Bridge-to-Bridge Independent Control Method for Dual-Active-Bridge Interlinking Converter

Wide-Load Range Multiobjective Efficiency Optimization Produces Closed-Form Control Solutions for Dual Active Bridge Converter

ZVS Operation of DAB Converter Based on Triple-Phase-shift Modulation Scheme with Optimized Inductor Current

Study on dual active bridge DC-DC converter based on second dual-phase-shifting control

A closed-loop DC-transformer control method for dual-active-bridge interlinking converters in DC microgrids

Adaptive Integral Sliding Mode Control Based Radial Basis Function Network for Bidirectional Isolated Dual Active Bridge Converter

Optimal Control of Multi-Level DAB Converters for Soft-Switching and Minimum Current Stress

Integrated Optimization of Dual-Active-Bridge DC–DC Converter with ZVS for Battery Charging Applications

Dual Switching Frequency Operation of Dual Active Bridge Converter

An Analog-based, Duty Cycle Modulation Method to Remove the DC Bias in the Transformer for a Dual Active Bridge Converter

Modular Dual-Active Bridge Converter Architecture

Overview of Multi-Degree-of-Freedom Modulation Techniques for Dual Active Bridge Converter

Hybrid-Bridge-Based Dual-Active-Bridge Converter With an Asymmetric Active-Neutral-Point-Clamped Three-Level Bridge

Modeling and Analysis of 2/3-Level Dual-Active-Bridge DC-DC Converters with the Five-Level Control Scheme

Unified State-Space Modeling Method For Dual-Active-Bridge Converters Considering Bidirectional Phase Shift

ZVS Control Strategy of Dual Active Bridge DC/DC Converter with Triple-Phase-shift Modulation Considering RMS Current Optimization

Hybrid control of ISOP-DAB converters based on double-loop decoupling

Dual-Transformer-Based DAB Converter with Controllable Integrated Inductances

A Simple and Fast Start-up Strategy for Dual Active Bridge Converters with DC Bias Suppression

A Collaborative Modulation Method of Dual-Side Backflow Power Optimization and Zero-Voltage Switching for Dual Active Bridge

Virtual Current Based Direct Power Control Strategy Of Dual-Active-Bridge Dc-Dc Converter