Isothermal (vapor + liquid) equilibrium measurements and correlation of the binary mixture 3,3,3-trifluoropropene (R1243zf) + isobutane (R600a) at temperatures from 283 . 15 to 323 . 15 K
Davide Menegazzo,Giulia Lombardo,Laura Fedele,Sergio Bobbo,Min Soo Kim,Yeonwoo Jeong,Sangwook Lee
DOI: https://doi.org/10.1016/j.ijrefrig.2024.02.032
IF: 4.14
2024-05-01
International Journal of Refrigeration
Abstract:The restrictions set by the F-gas Regulation and the Kigali Amendment to the Montreal Protocol have pushed an extensive research into alternatives for fluorinated greenhouse gases in air conditioning and refrigeration. Hydrofluoroolefins (HFOs) are emerging as promising substitutes for hydrofluorocarbons (HFCs) and hydrochlorofluorocarbons (HCFCs) in HVAC and refrigeration. Amongst these, R1243zf raised interests as low-GWP substitutes for R134a. The pursuit of low GWP refrigerants has also led to the examination of hydrocarbons (HCs), like propane (R290) and isobutane (R600a), due to their efficiency, low charge, and affordability, despite their flammability. The mixtures of R1243zf and isobutane could be of interest for medium temperature heat pump applications. Moreover, blending HFOs with HCs usually leads to azeotropic mixtures. While HCs benefit of a wide range of data and reliable Equations of State (EoS), HFOs, and in particular their mixtures, lack comprehensive information. This study reports vapor–liquid equilibrium (VLE) measurements for the 3,3,3-trifluoropropene (R1243zf) + isobutane (R600a) binary system in the temperature range between 283.15 K and 323.15 K. The measurements have been carried out by means of a vapor-recirculation apparatus combined with gas-chromatographic analysis. This work reports 53 experimental data with an expanded uncertainty ( k = 2 ) of 0.003 mol mol−1. The reported data, along with the data available in the literature, have been used to developed two new mixture models based on the Helmholtz free energy EoS, both leading to a significant improvement in the VLE prediction, with RMSE values lower than 0.005 mol mol−1 for both the liquid and the vapor phase composition.
engineering, mechanical,thermodynamics