Abstract:In order to study the shear mechanical properties of rock joint under different unloading stress paths, the RDS-200 rock joint shear test system was used to carry out direct shear tests on concrete joint specimens with five different morphologies under the CNL path and different unloading stress paths. The unloading stress paths include unloading normal load and maintaining constant shear load (UNLCSL), unloading normal load and unloading shear load (UNLUSL), unloading normal load and increasing shear load (UNLISL). The results show that the peak shear strength, cohesion, internal friction angle, pre-peak shear stiffness and residual shear strength of concrete joints under CNL path increases with the increasing JRC and normal stress. Under the UNLCSL path, under the same initial shear stress τ 1 , instability normal stress σ i decreases with the increasing JRC , and normal stress unloading amount Δσ n increases with the increasing JRC . Under the same JRC , σ i increases with the increase of τ 1 , and Δσ n decreases with the increasing τ 1 . Under the same JRC and σ i , τ i is significantly smaller under the UNLCSL path than the CNL path. Under the same JRC , the cohesion under the UNLCSL path is less than the CNL path, and the internal friction angle is higher than that the CNL path. Under the same JRC and σ i , τ i is the largest under the path of CNL and UNLISL, followed by the UNLCSL path, and τ i under the UNLUSL path is the smallest. Compared with the CNL path, the variation range of the specimen internal friction angle is within 3% while the average decrease percentage of the specimen cohesion reaches 37.6% under the UNLCSL path, UNLISL, and UNLUSL. Therefore, it can be inferred that the decrease in cohesion caused by normal unloading is the main reason for the decrease in joint instability shear strength. After introducing the correction coefficient k of cohesion to modify the Mohr-Coulomb criterion, the maximum average relative error after correction is only 3.5%, which is significantly improved compared with the maximum average relative error of 56.9% before correction. The research conclusions can provide some reference for the accurate estimation of shear bearing capacity of rock joints under different unloading stress paths, which is of great significance to the stability evaluation and disaster prevention of rock mass engineering.

Effect of Rock Shear Keys on the Shear Performance of Cold Joints in Rock-Filled Concrete Structures: Experimental and Numerical Investigation

Experimental and Numerical Investigation on Shear Failure Behavior of Rock-like Samples Containing Multiple Non-Persistent Joints

Investigating the Effect of Rock Bridge on the Stability of Locked Section Slopes by the Direct Shear Test and Acoustic Emission Technique

On Size Effect of Rock Joints Roughness Based on Varied Statistical Methods

Experimental Technology for the Shear Strength of the Series-Scale Rock Joint Model

Experimental Investigation into Mode-I Interfacial Fracture Behavior Between Rock and Self-Compacting Concrete in Rock-Filled Concrete

Experimental Investigation of Shear Keys for Adjacent Precast Concrete Box Beam Bridges

The mechanical performance of concrete shear key for prefabricated structures

Experimental and Analytical Studies on Interfacial Shear Behavior of Socket Connections with Shear Keys

Effect of Specimen Thickness and Coarse Aggregate Size on Shear Strength of Single‐keyed Dry Joints in Precast Concrete Segmental Bridges

Shear Behavior of Dry Joints with Castellated Keys in Precast Concrete Segmental Bridges

Shear behaviour and theoretical model of large shear key dry joints in precast concrete segmental bridges using advanced monitoring

Experimental Study on the Failure Process of Large Shear Key Joints Based on NDT Methods

Experimental study on shear mechanical properties of concrete joints under different unloading stress paths

Scale Effects on Shear Strength of Rough Rock Joints Caused by Normal Stress Conditions

Numerical Simulation Study on Shear Properties of Rock Joint Under CNS Boundary Conditions

Numerical Analysis on the Shear Behavior of Single-Keyed Dry Joints in Precast High-Strength Concrete Segmental Bridges

Experimental investigation on shear behavior of PVA-ECC keyed joints

Numerical Analysis on Shear Behavior of Joints under Low Confining and Eccentric Loads

Shear Performance of Single-Keyed Dry Joints Between Reactive Power Concrete and High Strength Concrete in Push-off Tests

The experimental and numerical simulation of interface shear behavior between ECC and coal gangue concrete