Abstract:Using single metal salts of zirconium, lanthanum, and iron as raw materials and sodium alginate as a cross-linking agent, a new composite adsorbent was prepared via the co-precipitation method and embedding immobilization technology, and its phosphorus adsorption performance in wastewater was evaluated. Scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) were used for characterization, and a 0.5 mol·L−1 sodium hydroxide solution was used to regenerate the adsorbent. The experimental results demonstrated that the adsorption rate reached 99.88% when the wastewater volume was 50 mL, the initial concentration of phosphorus-containing wastewater was 5 mg·L−1, the pH was 5, the dosage of composite adsorbent was 0.2 g, and the adsorption time was 200 min. The prepared adsorbent could reduce the initial phosphorus concentration of 5 mg·L−1 to 0.006 mg·L−1 in simulated wastewater, and from 4.17 mg·L−1 in urban sewage to undetected (<0.01 mg·L−1), thus meeting the discharge requirements of the grade A standard of the Urban Sewage Treatment Plant Pollutant Discharge Standard (GB18918-2002). The adsorption process conformed to the Freundlich adsorption isothermal equation and quasi-second-order kinetic equation, and the adsorption reaction was exothermic and spontaneous. More importantly, after three lye regeneration tests, the removal rate of phosphorus in water remained above 68%, that is, the composite adsorbent could be reproducibly fabricated and recycled. The characterization results showed that the surface of the composite adsorbent was rough, with a complex pore structure. After phosphorus removal, the surface morphology of the composite adsorbent showed a similar honeycomb structure, with a P-H, P-O stretching vibration peak and a characteristic P2p peak. At the same time, the proportion of hydroxyl groups (M-OH) on the metal surface decreased after adsorption. Our findings thus demonstrate that the mechanism of phosphorus removal is mainly based on the coordination exchange reaction between phosphate and metal active sites and surface hydroxyl groups, resulting in the formation of granular phosphate deposits.

Metal-based adsorbents for water eutrophication remediation: A review of performances and mechanisms.

Metal Element-Based Adsorbents for Phosphorus Capture: Chaperone Effect, Performance and Mechanism.

Recent advances in the removal and recovery of phosphorus from aqueous solution by metal-based adsorbents: A review

Review of Metal (hydr)oxide and Other Adsorptive Materials for Phosphate Removal from Water

Phosphorus removal from water by the metal-organic frameworks (MOFs)-based adsorbents: A review for structure, mechanism, and current progress

Recent Progress in Metal-Based Composites Toward Adsorptive Removal of Phosphate: Mechanisms, Behaviors, and Prospects

Zirconium-modified biochar as the efficient adsorbent for low-concentration phosphate: performance and mechanism

Performance and mechanism of phosphorus adsorption removal from wastewater by a Ce-Zr-Al composite adsorbent

Enhanced phosphate adsorption studies on several metal-modified aluminum sludge: preparation optimization, adsorption behavior, and mechanistic insight

Tuning adsorption capacity of metal–organic frameworks with Al3+ for phosphorus removal: Kinetics, isotherm and regeneration

Advancing sustainable phosphorus removal and recovery with Metal-Organic frameworks (MOFs)

Preparation and Phosphorus Removal Performance of Zr–La–Fe Ternary Composite Adsorbent Embedded with Sodium Alginate

Adsorption of Inorganic Phosphorus of Different Valences on Metal Oxides:A First-Principles Study

Phosphate removal and recovery by lanthanum-based adsorbents: A review for current advances

Metal-doped biochar for selective recovery and reuse of phosphate from water: Modification design, removal mechanism, and reutilization strategy

Insight into the synthesis and adsorption mechanism of adsorbents for efficient phosphate removal: Exploration from synthesis to modification

Iron‐based metal–organic frameworks for rapid and effective phosphorus removal from eutrophic lake water

Insight into Heterovalent Metal Modification for Lanthanum Carbonate to Enhance Phosphate Removal at Trace Levels

Enhanced Phosphate Removal From Water By Honeycomb-Like Microporous Lanthanum-Chitosan Magnetic Spheres

Lanthanum-Integrated Porous Adsorbent for Effective Phosphorus Removal

MOF-based Ca-alginate/PAA granulate beads for efficient heavy metal removal from water: Synthesis, performance, and mechanism